/
Session Border Controller - Source Policy Routing
Session Border Controller - Source Policy Routing
This feature lets the user to configure a network with different gateways for each IP address.
To create a new gateway:
Go to Configuration / IP Settings / Network on Source Policy Routing tab
Press Add button
In the form, choose the IP address.
And set the Default Gateway for the above IP address.
After save the form, there will be a new entry in the Source Policy Routing table.
It is important to note that for Source Policy Routing to work, Default Gateway Interface must be set in auto (empty). In fact this will be checked each time configuration is being appliedi If there is set an interface for default gateway, it will be set back to auto if there is, at least, one Source Policy Routing defined.
, multiple selections available,
Related content
Session Border Controller - Network Configuration
Session Border Controller - Network Configuration
More like this
Session Border Controller - SIP Message Routing / SIPRelay
Session Border Controller - SIP Message Routing / SIPRelay
More like this
Session Border Controller - SIP Message Routing / SIP Relay
Session Border Controller - SIP Message Routing / SIP Relay
More like this
Session Border Controller - RADIUS Connectivity
Session Border Controller - RADIUS Connectivity
More like this
Session Border Controller - Signaling Interfaces
Session Border Controller - Signaling Interfaces
More like this
Session Border Controller - SIP Options Passthrough Configuration
Session Border Controller - SIP Options Passthrough Configuration
More like this