Source Policy Routing

Owned by Nathaniel Halbrooks
Jan 02, 2024
1 min read

This feature lets the user to configure a network with different gateways for each IP address. 

To create a new gateway:

  1. Go to Configuration / IP Settings / Network on Source Policy Routing tab

  2. Press Add button

  3. In the form, choose the IP address.

  4. And set the Default Gateway for the above IP address.

After save the form, there will be a new entry in the Source Policy Routing table.

It is important to note that for Source Policy Routing to work, Default Gateway Interface must be set in auto (empty). In fact this will be checked each time configuration is being appliedi If there is set an interface for default gateway, it will be set back to auto if there is, at least, one Source Policy Routing defined. 

 

Return to Documentation Home I Return to Sangoma Support