IMG 1010 - SIP DTMF Support
Description:
SIP DTMF support object is created under the SIP SGP Profile object. The SIP DTMF Support object is used to enable and configure DTMF support in the Notify message of the Subscribe/Notify feature when sending a DTMF digit to another gateway. The supported DTMF digits are shown in the table below. Use this pane to enable and configure SIP DTMF support to send a DTMF digit to another gateway. There are two methods supported:
SIP INFO Method |
SIP Subscribe/Notify |
When creating the SIP SGP profile the default ID which is ID:0 will not allow you to change any parameters. When creating the SIP SGP Profile and a custom profile will need to be configured change the ID to something other than ID:0. If the ID is 0 then the fields under the SIP SGP profile and any objects created underneath this object will be set to defaults and the fields in the subsequent objects can not be changed.
Accessing this Pane
Dialogic IMG EMS -> Profiles -> SIP SGP Profile -> SIP DTMF Support
Maximum Objects:
1 per SGP
Related Topics:
IMG 1010 - SIP INFO Method - DTMF
ClientView Pane:
Field Descriptions:
Method:
Choose from drop down menu choices shown below
Disable (default)
Info with Pattern (this option previously named "INFO")
Subscribe
Info DTMF digit relay (10.3.3 ER 2+)
DTMF Pattern:
Choose from drop down menu choices shown below
Character entered into Phone | Description |
#### | Enter # symbol four times |
### | Enter # symbol three times |
## | Enter # symbol two times |
# | Enter # symbol once |
**** | Enter * symbol four times |
*** | Enter * symbol three times |
** | Enter * symbol two times |
* | Enter * symbol once |
Software Builds | Digits Supported |
10.3.3 ER2 - 10.3.3 ER6 | (####,###,##,#) |
10.3.3 ER7 + | (####,###,##,#) -and- (****,***,**,*) |
10.5.0 ER1 | (####,###,##,#) |
10.5.0 ER2 | (####,###,##,#) -and- (****,***,**,*) |
10.5.1 + | (####,###,##,#) -and- (****,***,**,*) |
DTMF Duration Time (ms):
This is the allowed amount of time for the entire DTMF string to be received. If the timer expires, it resets to zero and starts over.
Default = 500 ms
Default Subscriber Duration (s) (Subscribe/Notify Method Only):
The amount of time that a subscriber session will be kept up. This value is also the maximum allowed duration.
Minimum Subscriber Duration (s) (Subscribe/Notify Method Only):
The minimum amount of time that a subscriber session must be established for.