Hardware Installation

 


Unboxing

When opening up your Vega Gateway packaging, carefully inspect the components for any signs of damage due to shipping.
If you notice any damaged components please contact your point of purchase and indicate the issue.
Do not continue to install your Vega Gateway if any of your components are damaged.

 

What's In the Box

Your Package should contain the following items:

Vega 100G/200G

  • 1 Vega VoIP Gateway Appliance

  • 2 E1/T1 RJ45 CAT5 cables (Red colour)

  • 2 LAN Cables (Yellow colour)

  • 1 RJ45-USB Console Cable (light blue colour)

  • mounting feet

  • External Power brick

  • AC power Cord (Country specific)

  • Quick Start Guide

  • Warranty and License Information

Vega 400G

  • 1 Vega 400G VoIP Gateway Appliance

  • 4 E1/T1 RJ45 CAT5 cables (Red colour)

  • 2 LAN Cables (Yellow colour)

  • 1 RJ45-USB Console Cable (light blue colour)

  • 2 Mounting brackets

  • Power Cord (Country specific)

  • Quick Start Guide

  • Warranty and License Information

Vega 50 Analog

  • 1 Vega 50 VoIP Gateway Appliance

  • Vega 50 Analog

    • 4-8 Yellow Analog cables (amount dependent on number of analog ports)

  • 2 LAN Cables (Yellow colour)

  • 1 RJ45-to-serial Console Cable 

  • 2 Mounting brackets

  • External Power brick

  • AC power Cord (Country specific)

  • Quick Start Guide

  • Warranty and License Information

Vega 50 BRI

  • 1 Vega 50 VoIP Gateway Appliance

  • Vega 50 BRI

    • 4 BRI Cables

  • 2 LAN Cables (Yellow colour)

  • 1 RJ45-to-serial Console Cable 

  • 2 Mounting brackets

  • External Power brick

  • AC power Cord (Country specific)

  • Quick Start Guide

  • Warranty and License Information

Vega 5000

  • 1 Vega 5000 VoIP Gateway Appliance

  • 2 LAN Cables (Yellow colour)

  • 1 RJ45-to-serial Console Cable 

  • 2 Mounting brackets

  • AC power Cord (Country specific)

  • Quick Start Guide

  • Warranty and License Information

Vega 3000G

  • 1 Vega 3000 VoIP Gateway Appliance

  • 1 LAN Cables (Yellow colour)

  • 1 RJ45-to-usb  Console Cable 

  • 2 Mounting brackets

  • DC External Power Brick

  • AC power Cord (Country specific)

  • Quick Start Guide

  • Warranty and License Information

Vega 3050G

  • 1 Vega 3050 VoIP Gateway Appliance

  • 1 LAN Cables (Yellow colour)

  • 1 RJ45-to-usb  Console Cable 

  • 2 Mounting brackets

  • AC power Cord (Country specific)

  • Quick Start Guide

  • Warranty and License Information

Vega 60G

  • 1 Vega 60 VoIP Gateway Appliance

  • 1 LAN Cables (Yellow colour)

  • AC/DC External Power adaptor and power cord (country specific)

  • Quick Start Guide

  • Warranty and License Information

Vega 4 x 4

  • 1 Vega 4 x 4 VoIP Gateway Appliance

  • 2 LAN Cables (Yellow colour)

  • 1 RJ45-to-usb  Console Cable 

  • 2 Mounting brackets

  • AC power Cord (Country specific)

  • Quick Start Guide

  • Warranty and License Information

  • NOTE: Module(s) Sold Separately

Accessories

FXO Plug-In Module (for Vega 3050G)

  • 1 FXO Plug-In Module (provides 2 FXO ports)

  • 1 replacement cover plate with cut-out

  • Quick Start Guide

 

Component Overview

Vega 100G

Front Panel of Vega 100G
  

 

 

Back Panel of Vega 100G

 

 

  • Power - DC Power connector.

  • E1/T1 Port 1-2 - RJ45 port used to connect your E1/T1 Cable 

  • LAN Port 1/LAN Port 2 - RJ45 ports used to connect your LAN cables. These are Gigabit compatible ports.

    • Console - Used for diagnostics. Console cable plugs into this port

Port 1 is configured for CPE/TE. This port is typically connected to Telco as it is set to receive the clock from the remote side
Port 2 is configured for NET/NT. This port generating clock signal and is typical connected to another PBX
If you wish to change the configure of the ports (i.e. port 1:NET/NT or port 2: CPE/TE) you must connect a cross-over cable.  (there is no software configurable pin-switching)

Only one port can be used for VoIP (SIP<->TDM) as the license only allows for 30 VoIP sessions. However, you can use both ports if you are doing TDM<->TDM applications 

 

Find Below the Default pinout configuration:

 

Port 1 (CPE/Te)

Port 2 (NET/NT)

 

 

 

Vega 200G

Front Panel of Vega 200G
 

 

 

 

Back Panel of Vega 200G

 

 

  • Power - DC Power connector.

  • E1/T1 Port 1-2 - RJ45 port used to connect your E1/T1 Cable 

  • LAN Port 1/LAN Port 2 - RJ45 ports used to connect your LAN cables. These are Gigabit compatible ports.

    • Console - Used for diagnostics. Console cable plugs into this port

 

Port 1 is configured for CPE/TE. This port is typically connected to Telco as it is set to receive the clock from the remote side
Port 2 is configured for NET/NT. This port generating clock signal and is typical connected to another PBX
If you wish to change the configure of the ports (i.e. port 1:NET/NT or port 2: CPE/TE) you must connect a cross-over cable.  (there is no software configurable pin-switching)

 


Find Below the Default pinout configuration: 

Port 1 (CPE/Te)

Port 2 (NET/NT)

 

 

Vega 400G

Front Panel of Vega 400G
 

 

 

Back Panel of Vega 400G

 

 

  • AC Power - Power socket to be used with the AC Power cord provided with your Vega

  • Power Switch - Switch used to turn the Vega Gateway ON/OFF when power cord is plugged in

  • Port 1-4 - E1/T1 RJ45 ports used to connect E1/T1 cables. The 4 ports directly above these ports are only used for bypass mode

  • LAN 1/LAN 2 - RJ45 ports used to connect your LAN cables. These are Gigabit compatible ports.

Vega 50 Analog

Front Panel of Vega 50
 

 

 

 

Back Panel of Vega 50
 

 
Analogue FXS / FXO Variants


 

 

Vega 50 BRI

Front Panel of Vega 50
 

 

 

 

 

  • Power - DC Power connector.

  • Analog/BRI Ports - porst used to connect analog/bri cables 

  • LAN  1/LAN 2 - RJ45 ports used to connect your LAN cables. 

    • Console - Used for diagnostics. Console cable plugs into this port

   

Vega 5000

Front Panel of Vega 5000
 

 

 

Back Panel of Vega 5000 (25 port)
 

  

  • Power - AC Power socket..

  • Analog Ports - Am phenol RJ21 style connector with 25 analog ports.

  • LAN  1/LAN 2 - RJ45 ports used to connect your LAN cables. 

    • Console - Used for diagnostics. Console cable plugs into this port

Analogue FXS / FXO Variants

 

Vega 3000G

Front Panel of Vega 3000
  

 

Back Panel of Vega 3000 (24 port)
 

  

  • Power - AC Power socket..

  • Analog Ports - Am phenol RJ21 style connector with 24 analog ports.

  • LAN  1 - RJ45 ports used to connect your LAN cables. This is a Gigabit speed Lan port

    • Console - Used for diagnostics. Console cable plugs into this port

 

Vega 3050G

Front Panel of Vega 3050G
 

 

 

Back Panel of Vega 3050G (50 FXS port)
 

  From left to Right:

  • Power - AC Power socket.

  • FXS Ports 26-50 -  Amphenol RJ21 style connector with 25 analog ports.

  • FXS Ports 1-25 -  Amphenol RJ21 style connector with 25 analog ports.

  • FXO Ports 1-2 - FXO Plug In Module Sold Separately

  • Console - Used for diagnostics. Console cable plugs into this port

  • LAN  Port - RJ45 ports used to connect your LAN cables. This is a Gigabit speed LAN port

  • Power LED- When lit unit is active

 

FXO Plug-In Module (for Vega 3050G)


-> Installation Guide

Vega 60G

Front Panel of Vega 60G
 

Back Panel of Vega 100G

 

 

  • PSTN Interfaces: Protocol and density varies based on model

  • LAN Port- RJ45 port for LAN

  • USB Port- For Storage

  • Console - Used for diagnostics. Console cable plugs into this port

  • Power - DC Power connector.

  • Ground

 

Vega 4 x 4

Front Panel of Vega 4 x 4
 


Back Panel of Vega 4 x 4

 

 

  • Ground

  • Power - AC Power socket.

  • PSTN Interfaces: Protocol and density varies based on model Module(s) Inserted

  • Console - Used for diagnostics. Console cable plugs into this port

  • LAN Ports- RJ45 port for LAN

  • Power LED


NOTE: Module(s) Sold Separately

Module Pinouts

PSTN interface connections are made via RJ45 connectors. The pin-out of the connector depends on the type of module fitted.

Pin

FXSFXS

FXOFXO

FWIC

 GenGen

1

 

 

 

 

2

 

 

 

 

 

 

 Rx

 

4

 Tip

 Tip

 Tx

Tx/Rx 

5

 Ring

 Ring

 Tx

 Tx/Rx

6

 

 

 Rx

 

7

 

 

 

 

8

 

 

 

 

 

Hardware Installation

Placement

The Vega Gateway can be placed either table top or rack mounted

  • Table Top: Place Vega Gateway on flat level surface, away from moisture.  Verify adequate ventilation to prevent unit from overheating.  

  • Rack Mounting

    • All Vega Gateways can be rack mounted.  The packaging contents should include rack mounting brackets to be used when mounting on a standard 19" rack unit.  

    • Prerequisites:  

      • Rack mounting bolts (not supplied) are required to mount the gateway + bracket assembly to the rack unit

    • Rack Mounting Guides:

Ground

Once a location has been selected,  properly ground the Vega Gateway using the ground lug located to the left of the power socket 

Wiring Connection

Vega 50 / Vega 5000 / Vega 100/200/400G: 

Connect one of the LAN cables (yellow ended) ,that came shipped in the box, to LAN 1 port. You may leave LAN 2 unconnected as it is not typical used. (LAN 1 is configured to retrieve an IP address from DHCP)

Vega60G / Vega 3000G / Vega 3050G

Connect the Yellow LAN cable into the port labeled LAN, and the other end into your local network.  The LAN port is configured to retrieve an IP address from DHCP

Connect the PSTN cables,that came shipped in the box, to the PSTN ports. Connect as many PSTN ports as required.

Power Plug connection:

  • Vega 50 / Vega60G/ 100G / 200G / 3000G: Plug in the power cable to the external power brick/power socket, and the other end into the power connector on the Vega

  • Vega 400G / Vega 5000, Vega 3050G: Plug in the power cable into the power socket located on the Vega gateway

There is no power switch on the Vega60G/Vega 100G/200G/Vega50/Vega3000G/Vega3050G. As soon as you connect power to the unit it will power up. To switch off the Vega simply unplug the power cord.

 

The power LED on the front panel will illuminate. 
LAN LEDs will also illuminate indicating 10/100 or 10/100/1000 (Gigabit) connection (depending on your Vega). The LAN LEDs are duplicated on the front and rear of the Vega. The LEDs blink off to indicate LAN activity. 

 

Accessories

FXO- Plug-In Module For Vega 3050G

-> Installation Guide

 

 

Proceed to the "Finding your IP address" page now to being accessing the Vega Gateway WebGUI. 

 



Return to Documentation Home I Return to Sangoma Support