Vega Gateways - Hardware Installation

Table of Contents

1 What's In the Box
2 Accessories
3 Component Overview
4 Hardware Installation
- 4.1 Placement
- 4.2 Wiring Connections
  - 4.2.1 Lan Connections
  - 4.2.2 Power Connections
  - 4.2.3 Grounding
  - 4.2.4 Telecom Connections
- 4.3 Accessories

When opening up your Vega Gateway packaging, carefully inspect the components for any signs of damage due to shipping.

If you notice any damaged components please contact your point of purchase and indicate the issue.

Do not continue to install your Vega Gateway if any of your components are damaged.

What's In the Box

Your Package should contain the following items:

Vega 100G/200G/100Gv2/200Gv2

1 Vega VoIP Gateway Appliance
2 E1/T1 RJ45 CAT5 cables (Red colour)
2 LAN Cables (Yellow colour)
1 RJ45-USB Console Cable (light blue colour)
mounting feet
External Power brick
AC power Cord (Country specific)
Quick Start Guide
Warranty and License Information

Vega 400G/400Gv2

1 Vega 400G VoIP Gateway Appliance
4 E1/T1 RJ45 CAT5 cables (Red colour)
2 LAN Cables (Yellow colour)
1 RJ45-USB Console Cable (light blue colour)
2 Mounting brackets
Power Cord (Country specific)
Quick Start Guide
Warranty and License Information

Vega 3000G

1 Vega 3000 VoIP Gateway Appliance
1 LAN Cables (Yellow colour)
1 RJ45-to-usb Console Cable
2 Mounting brackets
DC External Power Brick
AC power Cord (Country specific)
Quick Start Guide
Warranty and License Information

Vega 3050G/3050Gv2

1 Vega 3050 VoIP Gateway Appliance
1 LAN Cables (Yellow colour)
1 RJ45-to-usb Console Cable
2 Mounting brackets
AC power Cord (Country specific)
Quick Start Guide
Warranty and License Information

Vega 60G

1 Vega 60 VoIP Gateway Appliance
1 LAN Cables (Yellow colour)
AC/DC External Power adaptor and power cord (country specific)
Quick Start Guide
Warranty and License Information

Vega 4 x 4

1 Vega 4 x 4 VoIP Gateway Appliance
2 LAN Cables (Yellow colour)
1 RJ45-to-usb Console Cable
2 Mounting brackets
AC power Cord (Country specific)
Quick Start Guide
Warranty and License Information
NOTE: Module(s) Sold Separately

Accessories

FXO Plug-In Module (for Vega 3050G)

1 FXO Plug-In Module (provides 2 FXO ports)
1 replacement cover plate with cut-out
Quick Start Guide

Component Overview

Vega 100G/100Gv2

Front Panel of Vega 100G/100Gv2

Back Panel of Vega 100G/100Gv2

Power - DC Power connector.
E1/T1 Port 1-2 - RJ45 port used to connect your E1/T1 Cable
LAN Port 1/LAN Port 2 - RJ45 ports used to connect your LAN cables. These are Gigabit compatible ports.
- Console - Used for diagnostics. Console cable plugs into this port

Port 1 is configured for CPE/TE. This port is typically connected to Telco as it is set to receive the clock from the remote side
Port 2 is configured for NET/NT. This port generating clock signal and is typical connected to another PBX
If you wish to change the configure of the ports (i.e. port 1:NET/NT or port 2: CPE/TE) you must connect a cross-over cable. (there is no software configurable pin-switching)

Only one port can be used for VoIP (SIP<->TDM) as the license only allows for 30 VoIP sessions. However, you can use both ports if you are doing TDM<->TDM applications

Vega 200G/200Gv2

Front Panel of Vega 200G/200Gv2

Back Panel of Vega 200G/200Gv2

Power - DC Power connector.
E1/T1 Port 1-2 - RJ45 port used to connect your E1/T1 Cable
LAN Port 1/LAN Port 2 - RJ45 ports used to connect your LAN cables. These are Gigabit compatible ports.
- Console - Used for diagnostics. Console cable plugs into this port

Port 1 is configured for CPE/TE. This port is typically connected to Telco as it is set to receive the clock from the remote side
Port 2 is configured for NET/NT. This port generating clock signal and is typical connected to another PBX
If you wish to change the configure of the ports (i.e. port 1:NET/NT or port 2: CPE/TE) you must connect a cross-over cable. (there is no software configurable pin-switching)

Vega 400G/400Gv2

Front Panel of Vega 400G/400Gv2

Back Panel of Vega 400G/400Gv2

AC Power - Power socket to be used with the AC Power cord provided with your Vega
Power Switch - Switch used to turn the Vega Gateway ON/OFF when power cord is plugged in
Port 1-4 - E1/T1 RJ45 ports used to connect E1/T1 cables. The 4 ports directly above these ports are only used for bypass mode
LAN 1/LAN 2 - RJ45 ports used to connect your LAN cables. These are Gigabit compatible ports.

Vega 3000G

Front Panel of Vega 3000

Back Panel of Vega 3000 (24 port)

Power - AC Power socket..
Analog Ports - Am phenol RJ21 style connector with 24 analog ports.
LAN 1 - RJ45 ports used to connect your LAN cables. This is a Gigabit speed Lan port
- Console - Used for diagnostics. Console cable plugs into this port

Vega 3050G/3050Gv2

Front Panel of Vega 3050G/3050Gv2

Back Panel of Vega 3050G/3050Gv2 (50 FXS port)

From left to Right:

Power - AC Power socket.
FXS Ports 26-50 - Amphenol RJ21 style connector with 25 analog ports.
FXS Ports 1-25 - Amphenol RJ21 style connector with 25 analog ports.
FXO Ports 1-2 (optional) - FXO Plug In Module Sold Separately
Console - Used for diagnostics. Console cable plugs into this port
LAN Port - RJ45 ports used to connect your LAN cables. This is a Gigabit speed LAN port
Power LED- When lit unit is active

FXO Plug-In Module (for Vega 3050G)

-> Installation Guide

Vega 60G/60Gv2

Front Panel of Vega 60G/60Gv2

Back Panel of Vega 60G/60Gv2

PSTN Interfaces: Protocol and density varies based on model
LAN Port- RJ45 port for LAN
USB Port- For Storage
Console - Used for diagnostics. Console cable plugs into this port
Power - DC Power connector.
Ground

Vega 4 x 4

Front Panel of Vega 4 x 4

Back Panel of Vega 4 x 4

Ground
Power - AC Power socket.
PSTN Interfaces: Protocol and density varies based on model Module(s) Inserted
Console - Used for diagnostics. Console cable plugs into this port
LAN Ports- RJ45 port for LAN
Power LED

NOTE: Module(s) Sold Separately

Hardware Installation

Placement

The Vega Gateway can be placed either tabletop or rack mounted

Tabletop: Place Vega Gateway on flat level surface, away from moisture. Verify adequate ventilation to prevent unit from overheating.
Rack Mounting:
- All Vega Gateways can be rack mounted. The packaging contents should include rack mounting brackets to be used when mounting on a standard 19" rack unit.
- Prerequisites:
  - Rack mounting bolts (not supplied) are required to mount the gateway + bracket assembly to the rack unit
- Rack Mounting Guides:
  - Vega 60G

Wiring Connections

Lan Connections

Connect one of the supplied LAN cables (yellow ended) from the LAN1 or LAN port to your network. The first LAN port is configured to receive an IP address from DHCP.

Power Connections

For units with an internal power supplied connect the unit using the supplied power cable.

For units with an external power supply use the supplied power cable to connect the Power Supply Unit and then connect the Power Supply Unit to the Vega Gateway,

There is no power switch on the Vega60G/Vega 100G/200G/Vega50/Vega3000G/Vega3050G. As soon as you connect power to the unit it will power up. To switch off the Vega simply unplug the power cord.

The power LED on the front panel will illuminate.
LAN LEDs will also illuminate indicating 10/100 or 10/100/1000 (Gigabit) connection (depending on your Vega). The LAN LEDs are duplicated on the front and rear of the Vega. The LEDs blink off to indicate LAN activity.

Grounding

The grounding point should be connected to a ground connection.

Telecom Connections

The telecom connections vary depending on the model and variant. For full details please see https://sangomakb.atlassian.net/wiki/x/AoAuUw

Accessories

FXO- Plug-In Module For Vega 3050G

-> Installation Guide

Proceed to the "Finding your IP address" page now to being accessing the Vega Gateway WebGUI.