IMG 1004 - Rack Mounting

Overview:

The IMG 1004 is shipped ready to be mounted in a 19" rack. Use instructions below when installing into rack.

Factory Installed 19" Bracket Position

The IMG 1004 ships with brackets for a 19" rack. They are installed in the front mount position. See diagram below

Open

Mounting Options

Brackets can be positioned and rotated to align ears as required. The mounting brackets can be positioned on either the front or the rear of the IMG 1004.

Mounting Guidelines

When mounting the chassis, follow these guidelines:

• Do not obstruct air flow to the front or the side vent holes.

• Mount in a clean well ventilated area
   

19" Rack Mounting:

Required Tools and Hardware

The following customer-supplied tools and hardware are needed to mount the unit.

• Phillips head screwdriver

• Rack mounting hardware
   

Procedure:

• Position the mounting brackets on the side of the IMG 1004 in either the front or rear of chassis and secure with supplied screws.

• Align the holes on the mounting bracket ears to the mounting holes on the rack.

• Secure IMG 1004 into 19" rack with correct thread and size screws.

Next Task

IMG 1004 - Connecting AC Power