IMG 1010 - SPIROU-ITX in SIP INFO
The ITX/TXA messages are used in a Spirou (Signalisation Pour l'Interconnexion des Réseaux Ouverts/Signaling for the Interconnection of Open Networks) network for audio services that are paid for by either a flat rate calculation or time based calculation. The calls are routed to the operator, and the operator reports the payment amount with the ITX message. An example of this functionality would be a customer calling a weather forecast service with a fee involved. The call is routed through an operator which would report the payment amount by the ITX messages and the customer would get charged accordingly.
...
Right Click on IMG EMS and select New Signaling Variants.This is a container object, multiple signaling variants can be created under this object.
Right Click on New Signaling Variants and selectImport Variant Table.
The 'Configure Import Variant Table' dialog box will appear. Select Spirou.xml from drop down menu. Select Next and then FINISH after verifying the correct .xml file was selected. See Below.
Under the Signaling Variants object the France variant will appear in the ClientView tree along with all the PPL messages needed for this variant.
...
Right Click on IMG name and select New Signaling. A signaling object will get created. Under this object, the SS7 Stack is created. See IMG 1010 - Signaling Object link.
Right Click on Signaling object and select New SS7. An SS7 Standalone object will get created. See IMG 1010 - SS7 Signaling Object .
Right Click on SS7 Standalone and select New SS7 Stack. Enter an OPC and select France from drop down menu in the SS7 Variant field. (folder in /opt/dialogic/common/config/Variant directory).
Finish configuring the stack with Link Sets, Links and Routes. See IMG 1010 - Configuring SS7 Signaling - 10.5.1 link.
...
Right click on Profiles object and select New SIP SGP. A SIP_Prof0 object will appear. Change the ID from the first field to something other than ID:0. ID:0 is the default SIP profile and the 'INFO for Spirou/ITX' field is disabled when the default configuration is used.
Enter a name in the 'SIP Profile Name' field to identify this profile.
To enable the 'INFO for Spirou/ITX' select enable from drop down menu in the 'INFO for Spirou/ITX' field. See screen capture below:
See IMG 1010 - SIP Profile - 10.5.3 link for more information on configuring each of the fields.
...
Right Click on IMG EMS again and select New External Network Elements. See IMG 1010 - External Network Elements link.
Right Click on External Network Elements object and select New External Gateways. See IMG 1010 - External Gateways link.
Right Click on External Gateways object and select New External Gateway. Enter the following from screen capture: See IMG 1010 - External Gateway link:
Enter a Name in the name field.
Enter an IP address in the 'Gateway IP Address' field.
Select SIP from Gateway Signaling Protocol drop down menu.
Select the SIP SGP Profile created earlier from drop down menu of SIP Profile field.
Go back to the SIP Channel Group created. Right Click on SIP channel group and select the gateway created. See below:
See IMG 1010 - IP Network Element for more information.
...