...
| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The T3Mux has been optimized to interwork with four Sangoma A108 PCIe cards.
A server with four A108 cards + T3Mux can achieve full T3 capacity using only 14 RJ45 cables.
A straight RJ45 cat5 or cat6 Ethernet cable can be used to connect T3Mux to A108 RJ45 port.
Each RJ45 (cat5/6) straight cable carries 2 T1 lines. (4 wires for each port)
Each T3Mux only takes up 1U of rack space.
Up to 3 x T3Mux boxes can be placed on a single 1U 19'' rack.
A108 cards must be configured in LINEAR hardware RJ45 port map mode.
Minimum wanpipe driver that support LINEAR operation mode: wanpipe-3.5.24.tgz
T3Mux RJ45 Connector Specs
...
The A108 card contains 4 RJ45 Ports, and each carries 2 T1 lines. Total of 8 T1 lines
First 4 wires of RJ45 connector are used for 1st T1 port and
second 4 wires of RJ45 connector are used for 2nd T1 port.For each RJ45 connector the DEFAULT T1 ports mappings are:
Port: [01,05] [02,06] [03,07] [04,08]For each RJ45 connector the LINEAR T1 ports mappings are:
Port: [01,02] [03,04] [05,06] [07,08]
This option must be specified in /etc/wanpipe/wanpipe1.conf file.
[wanpipe1] Section
HW_RJ45_PORT_MAP = LINEAR
| Info |
|---|
Important: When connecting T3Mux to 4 x A108.
|
...
|