T3Mux M13 Multiplexer

Open

Introduction

Introducing Sangoma's new M13 multiplexer that can rearrange a DS3 framing signal into 28 T1 framing. Sangoma offers this cost-effective and reliable solution, consistent with the quality and affordability of its other product families.

Open

A DS3 will reduce overall expenses and control costs by combining data and voice applications over one circuit. The benefits can be reaped as soon as you subscribe to more than 8 T1 circuits simultaneously. 

The T3Mux offers a simplified and user-friendly management console accessible via Ethernet or RS232. It features a VT100 terminal interface for system manage-ment, DS1 and DS3 Interface configuration.

• DS3 Interface via BNC Coax

• T1 Interface via RJ-45 Connectors

• Simple Console Management Configuration via Ethernet and RS232 Interface

• M13 and C-bit signalling support

• External DS3 clock option

• B8ZS and AMI DS1 signalling support

• Industry standard CSU and NIU loopback codes

• Requires only 10W from external power adapter

T3Mux RJ45 Connector Specs
 

• T3Mux contains 14 RJ45 Ports, and each carries 2 T1 lines.  Total 28T1 lines

• First 4 wires of RJ45 connector are used for 1st T1 port and second 4 wires of RJ45 connector are used for 2nd T1 port.

• For each RJ45 connector the T1 ports mappings are:
   Port: [01,02] [03,04] [05,06] [07,08] [09,10] [11,12] [13,14] 
            [15,16] [17,18] [19,20] [21,22] [23,24] [25,26] [27,28]