...
Table of Contents | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Unboxing
When unboxing your appliance packaging carefully inspect the components for any signs of damage due to shipping.
If you notice any damaged components please contact your point of purchase and indicate the issue.
Do not continue to install your appliance if any of your components are damaged.
...
First decide where you want to mount your NetBorder SS7 Gateway. If not mounting on a rack, verify the unit is placed on a flat level surface, away from moisture. Also verify adequate ventilation to prevent the unit from overheating.
If the appliance will be rack mounted, follow the rack mount installation steps:
Flex 8-port appliance: ftp https://ftp.sangoma.com/nsc/Sangoma-NetBorder-Rail-1U-User-Guide.pdf
8-32 port appliance: ftp https://ftp.sangoma.com/nsc/Sangoma-NetBorder-Rail-1U-User-Guide.pdf
64 port 2 U appliance: included in the packaging
...
To connect to the appliance, utilize the serial console port or VGA port and connect to a monitor, with USB keyboard.
Note: Some previous versions of this hardware had an IPMI port for configuration. If you hardware has an IPMI port, instructions for using it are here: ftphttps://ftp.sangoma.com/nsc/Sangoma-NetBorder-IPMI-UserGuide.pdf
By default the NSG appliance gets shipped with following configuration.
- Static IP 192.168.168.2 / 255.255.255.0
- Static IP Port eth0 (Primary Ethernet Interface Port)
- WebUI URL http://192.168.168.2:81
- Username: root
- Password: sangoma
...