...
PCIe digital telephony card (1E1 or 2E1 ports) inserted into one of the two PCIe ports available in the appliance as this provides the actual PRI ports to the appliance for interconnecting with the PSTN
Gateway Software (NSG) commercial License (you can still install and start using the software without license but you won't be able to process calls until the commercial License is installed)
USB drive (could be a "pendrive"/ "flashdrive") of at least 1GB of capacity
USB Keyboard and VGA Monitor connected to the Multi-Platform appliance
Multi-Platform appliance connected to the network via an Ethernet cable on its first RJ45 network port from the left (port is labeled: "0" )
...
1. Download the digital voice Gateway (NSG) unattended ISO file from: ftphttps://ftp.sangoma.com/nsg/5.2/ISO/custom/nsg-5.2.0-126-Dynamic-Config-unattended.iso
2. Transfer the downloaded .iso file to a USB drive and have it be bootable. For this you may use Rufus (https://rufus.akeo.ie/) for example; follow this guide starting on Step 2 if needed --- WARNING: please be aware that the USB drive will get completely wiped out so please backup any important data first
...
7. You can now start using the Multi-Platform Appliance as a digital voice Gateway. To visit its web configuration interface (webUI), just point your web browser to the IP address obtained in steps 5-6 above; from there you can start configuring your new Gateway. Please refer to its wiki for its complete documentation.
...