Reset DB10N/DB10E Basestation
Navigate to http://IPaddress/, where IPaddress is the IP address of your basestation.
Login using the username/password you configured in Endpoint Manager or the admin/admin for an unconfigured basestation
Navigate to Management
Click "Default Base Station".
The basestation LED will flash orange for a few moments while it attempts to retrieve a new configuration.
Any handsets that are registered to the basestation will become unregistered, and will need to be registered again.
Reset D10M Handset
Open the main menu by pressing the select button
Navigate to Settings
Scroll down to "Reset settings" and press the select button
Enter the Access Code you configured in Endpoint Manager for the basestation.
Press the select button
The handset will be re-registered with the basestation if it was previously registered.