Sangoma Documentation

Sangoma Documentation Home

Phones

All content
Space settings

Results will update as you type.

Sangoma Telephones
Business Voice - Supported Phones
Sangoma Telephones Marketing Collateral
•
What is the default username & password to access the Web GUI on Digium phones?
•
Can the Digium Phone display in languages other than English
•
Digium Phone Cannot Provision via DHCP Option 66
•
How Digium phone digitmap works
•
How do I create a custom dial plan for a Snom phone?
•
How do I disable the stop recording softkey on a Digium phone?
•
How do i get my Digium D40 and D50 phones to work on LLDP
•
How do I get my Digium phone out of "Test Mode"?
•
How do I reset a Polycom Phone when the default password 456 does not work?
•
How do you get an Aastra phone to auto answer a page?
•
How to change language/locale on a Digium Phone if you have defined it in Switchvox
•
How to register an Ekiga soft phone
•
Only the first four pages of the D70 sidecar display the user status and BLF
•
Removing "Digium Asterisk" Text From Status Bar on Digium Phones
•
Setting Headset As Default Device
•
Where do I find the EULA for Digium Phones
•
Where do I set the QoS Setting on the Phone
•
Why can't I update phone firmware or custom ringtones after a FreePBX update?
•
Why do remote Polycoms phones have long delay when calling internal phones?
•
Why does my Snom M9 wireless phone not respond to HOLD?
•
Why is my Snom MP incorrectly sending DTMF via SIP?
•
How to manually assign an ip address to a Polycom phone?
•
Disabling virtual keys on Snom 8XX phones
•
Manual configuration of Polycom phone
Telephone Technical Notes and Resources
•
On a Digium Phone, how do I change the date and time display to be different than the PBX?
•
Why is there no audio on my handset but the speakerphone works?
•
What are the supported SNOM phone models?
•
Why does my Digium phone keep trying to contact the wrong proxy address?
•
How to fix presence issues on Digium phone
•
Digium phone is stuck reconfiguring
•
Why Does My iPhone Softphone Have One-way Audio?
•
Caller hears echo on Plantronics CS540 headset
•
What does a Digium phone's admin password change to after the phone has been registered, and where can I find it?
•
Why is my Digium Phone failing to connect through an IPsec Tunnel?
•
What do I do when my phones keep changing to Unreachable over time?
•
Unsupported IP Phone Manual Registration
•
How to manually register a remote phone
•
Why am I still getting one way audio after I factory Reset my Polycom phone
•
How can I quickly tell if the receiver on my handset is broken?
•
Where do I find the revision number of my phone?
•
Where do I find the revision number of my analog telephony card?
•
How to change the backgroud picture on your Ploycom VVX model phone
•
Can you perform a blind transfer with a softphone?
•
What To Do When a Digium Phone Using PoE Displays Error: Failed to contact the boot server and keeps rebooting.
•
Why can't I make more than 1 G729 conference call on my Grandstream GXP 2100 when I have multiple G729 channels available?
•
How to resolve Switchvox softphone for iPhone crashing
•
Why does my Digium phone say Failover Mode and what does it mean?
•
How do I set an alternate Host for a Polycom phone registered with a feature pack
•
How do I register my Polycom VVX series phone to Switchvox with a feature pack?
•
What Do I Do When my Switchvox 60, 65, 80 or 305 will not auto boot?
•
How do I set up a 9470 Jabra Headset w/JABRA LINK 14201-17 Electronic Hook Switch?
•
Why are my Digium phones slow to respond or randomly reboot?
•
Can I disable the "ignore" softkey on my Digium phone?
•
Why does my Polycom VVX phone give me a warning that it is running pre 3.3.0 firmware and how do I resolve this issue?
•
How Do I Manually Register A Snom M9 Phone
•
Is there a way to remove a Polycom phone from the Unknown Phones list under Phone Feature Packs?
•
Where can I find a legend for the icons on Digium phones?
•
Why Does My Polycom Phone Message Light Blink When There Is No Message Waiting?
•
How do you perform a factory reset on a Digium phone?
•
How do you get the firmware version of a phone through its user interface?
•
How do you get the MAC address of a phone without accessing the PBX?
•
What can I check if Digium phones are timing out?
•
How To Reset a Digium Phone Using the Keypad
•
How do I register a Konftel 300IP SIP phone?

/

/

Sangoma S-Series and DECT Telephones

/

DECT - DC201

Owned by Kelli Higdon

Last updated: Feb 28, 2024

1 min read

Loading data...

Return to Documentation Home I Return to Sangoma Support

{"serverDuration": 14, "requestCorrelationId": "e2c76da0db62438980dc547ae3b900a4"}