IMG 1010 - Hardware Installation Summary

Click on links below to perform each of the following steps.

• Prepare the site that IMG 1010 will be installed.
  IMG 1010 - Site Preparation
  

• Unpack IMG 1010 from shipping box.
  IMG 1010 - Unpacking
  

• Mount the IMG 1010 in one of the two scenarios listed below.
  IMG 1010 - Rack Mounting
  IMG 1010 - Surface Mounting
  

• Connect Power
  IMG 1010 - Connecting AC Power
  IMG 1010 - Connecting DC Power (IMG 1010 Only)
  

• Connect IMG 1010 to Networks
  IMG 1010 - Connecting Ethernet and TDM Cables
  

• Loop Timing can be configured on specific ports. See diagram on where loop timing can be configured.
  IMG 1010 - Network Timing (IMG 1010 Only)
  

• The IMG 1010 has an active and standby port for each of the Ports below. Click on each link to see diagram displaying how redundancy needs to be setup.
  IMG 1010 - Redundant Control
  IMG 1010 - Redundant Data
  IMG 1010 - Redundant Signaling
  

Related Topics:

IMG 1010 - RJ 48 Connector Pinouts