Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

Legacy Documentation

Before Starting

Document name

Description

Declaration of Conformity -

Declaration of Conformity Certificate

Approvals -

Approval Certificate

SIP / H.323 Dual boot operation -

Guide on how to select H.323 or SIP operation at initial power on

Safety and Compliance Information -

Safety and Compliance Information for all Vega gateway installs

Step-by-Step Configuration

Document name

Description

SIP Quick Start Guide -

Quick Config guide for R8.1 and later

Quick SIP Config Reference -

Quick Config User Manual for R8.1 and later

R7 H323 with Gatekeeper -

Configuring Vega 400, H323, release 7

R8 SIP With Proxy and Standalone -

Configuring the Vega 400 in release 8

R7 SIP With Proxy and Standalone -

Configuring the Vega 400 in release 7

Signalling

Document name

Description

R2MFC configuration -

How to configure E1 Vega gateways to support R2MFC and how to take traces of R2MFC call tones and line signalling

E1 / T1 connection Checklist -

Steps to ensure that an E1 / T1 Vega gateway is configured to connect to the network correctly

Interoperation

Document name

Description

Microsoft OCS

Guides to using Vega gateways with Microsoft OCS

Telecount Radius Server

A guide to using the Telecount Radius server to collect Radius billing info

CISCO AS5300 / Vega Guide -

How to configure Release 4, 5 and 6 Vega gateways and Cisco AS5300s to interoperate

BroadSoft with Vega 400 -

Guide to configuration of, and interoperation of Vega with BroadWorks R11.1

Additional Documents

Document name

Description

Vega 400 LAN configuration -

How to configure the two LAN interfaces on the Vega 400 for single and dual LAN interface operation

Vega between PBX and ISDN -

Configuration parameters to allow an ISDN Vega to transparently pass calls between its two ISDN trunks

Rack Mount Instructions -

How to use the rack mount brackets provided to install the Vega in a 19inch rack

Introduction to Vega Dial Plans -

How to write dial plans to route, authenticate and apply number translation to incoming calls before onward routing

Vega Provisioning -

How to Configure Vega Provisioning

  • No labels