This page describes the currently available software releases for the Sangoma Vega Media Gateways. In almost all cases, the correct software to use is the Recommended GA release for your hardware.

The release for some Vega gateways may include an accompanying DSP release.

If you require any assistance please contact Sangoma Support.

Recommended (GA) Releases

General Availability (GA) releases are the recommended releases for the majority of customers and deployments. They support the full range of platforms and features.

Release 12.0 GA Releases

Product	Recommended (GA) Release
Vega 100G, 200G, 400G, 400GF	VEGA_R120S030 \| Released: 2024-04-29 \| Release Notes
Vega 4x4	VEGA_R120S030 \| Released: 2024-04-29 \| Release Notes
Vega 60G V2	VEGAARMv2_R120S030 \| Released: 2024-04-29 \| Release Notes Strictly for Vega 60Gv2 FXS and FXO devices. This must not be used on BRI units. A small number of Vega 60G BRI units have been incorrectly labelled as 60Gv2. These are not v2 variants and loading the v2 firmware will cause serious issues. If you have an affected unit please contact support to arrange a replacement.
Vega 3000G , Vega 3050G, 60G	VEGAARM_R120S030 \| Released: 2024-04-29 \| Release Notes Do not install on Vega 60Gv2 FXS and FXO

Release 13.1 GA Releases

Note that in release 13.0 and above the default password on install will be set to the serial number of the unit with all characters in lower case. This can be found on the regulatory label attached to the unit or on the packaging.

Product

Recommended (GA) Release

Vega 100Gv2, 200Gv2, 400Gv2

VEGA_R131S003

Strictly for Vega 100Gv2, 200Gv2 and 400Gv2 Digital devices. This is not compatible with 100G, 200G and 400G units. You can determine the version of your unit by looking at the nameplate on the rear panel.

Limited Availability Releases

Other Releases

The releases here are for certain customers who have specific requirements. They are not recommended for general use and Sangoma will only provide support for these releases if you have been told by us to use one of them. Please contact Sangoma to discuss your requirements before deploying in a production environment.

For a full description of the changes and features in Release 13.0 please refer to Vega Release 13.0