IMG 1010 - Configuring a Range of DS3 - 10.3.x

Configuring a Range of DS3s (Software 10.3.x & IMG1010 only)

To configure a range of DS3s, use the Facility Wizard.

• Right-click Facility and select New TDM DS3. The TDM DS3 pane appears:
  
  

  Open

  

• Complete the fields as required. 

• Click the Facility Wizard button at the bottom of the TDM DS3 pane. The DS3 Wizard pane appears

• Enter the Starting Offset and the Span Count to identify the range of DS3s you are configuring.

• Click OK. The DS3 Physical Span pane appears:
  
  

  Open

  

• Complete the fields as required. See IMG 1010 - DS3 Physical Span - 10.3.x for details.