The following content only applies to FreePBX and PBXact platforms

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Secure Calling for Sangoma Talk Mobile

The Sangoma Talk Mobile app can secure calls with TLS/SRTP. In the app, when secure calling is enabled, the lock icon indicates the call is encrypted. 

Prerequisites

  • Sangoma Connect Module version 14.0.12/15.0.12 or later.

  • A valid SSL certificate from a trusted authority must be installed on your PBX as documented in Certificate Management User Guide.

  • Phones must be set up to use secure calling as documented in TLS and SRTP.

If you enable (or disable) secure calls, the Sangoma Talk Mobile app must be reset, and the user must reconfigure. They can request an invitation email for themselves at any time (see Replacement Email Invitation). 

Sangoma Talk Mobile Setup

Navigate to FreePBX admin > SangomaTalk > Settings tab

  • Registration Address is where you define the fully qualified domain name for the PBX. This will be the FQDN used for the TLS certificate.

  • Default Transport - Sangoma Talk will use whatever transport that has been defined for the primary extension on the Advanced tab. In cases where the primary extension transport is set to 'Auto', Sangoma Talk will use the transport defined here.

  • No labels

Return to Documentation Home I Return to Sangoma Support