Vega 4 x 4 VoIP Gateway
View Data sheet
Module Install Guide
Sangoma’s Vega 4 x 4 connects analog private wires, audio sources and the PSTN to SIP networks for up to 16 calls
Up to 4 modules, each supporting 4 ports, are manually installed into the chassis, providing FXO, FXO, GenGen, Audio Ports to the RJ45 connectors
End User Module Installation Required. This requires End-User to open Vega 4x4 chassis. Please refer to the Module Install Guide
Applications
Connect dealerboards to legacy analog private wire connections
Bring audio sources, such as TV, into the SIP network
Connect worldwide private wires regardless of what's at the other end
Provide standards-based SIP private wires
Connect multiple analog sources to SIP infrastructure
Open, Non-Proprietary Interfaces
The Vega 4x4 Supports SIP and T.38 Fax
Four module slots are available for different module types, each with 4 ports, and can be populated in any configuration.
The module types available are:
FXO for connection to PBX extension lines or the PSTN
FXS for connection to analog telephones or trunk ports
Audio for connecting two-way audio sources
SIP to SIP call routing
GenGen for connecting GenGen or magneto type lines
The Vega 4x4 gateway has proven interoperability with a wide range of existing telecommunications and VoIP equipment.
ENP – Enhanced Network Proxy (Optional)
This option enables continuity of service during WAN/SIP outage and may be configured to operate in a number of ways including:
Standalone proxy
IP device survivability
IP device call routing
Emergency call routing
SIP to SIP call routing
Density
With up to 16 ports of FXS, FXO, GenGen, Audio (dependent on the type of module(s) installed) in a chassis that is only 1U high & half a rack deep, these gateways provide exceptional density
Interfaces
VoIP
SIP
Audio codecs:
G.711 (a-law/µ-law)
G.729a
G.723.1 (5.3/6.4 kbps)
G.726
FAX Support – up to G3 FAX, using T.38
Modem Support – up to V.90, using G.711
16 VoIP channels
Telephony Interfaces
FXS
Up to 16 ports presented on RJ45
600R, 900R or CTR-21 line impedance
FXO
Up to 16 ports presented on RJ45
600R, 900R or CTR-21 line impedance
GenGen
Up to 16 ports presented on RJ45
75V RMS ringing
Audio
Up to 16 ports presented on RJ45
Unbalanced audio input, receive (mic) and transmit (speaker)
LAN Interfaces
2 RJ-45s, 10 BaseT/100 BaseTX, full/half duplex
Features
Telephony Features
Available on FXS ports:
Call Waiting
Call Forward – Unconditional, Busy, No-Answer
Call Transfer – Blind, Consultative
3-Way Conference
Do Not Disturb
Message Waiting Indicator – Audible, Visual
Music on Hold
Executive Barge
Identification
Caller ID presentation – UK, DTMF, Bellcore GR30, ETSI
Caller ID screening allows connections to be accepted only from selected call sources
SIP Registration & Digest Authentication
Operation, Maintenance & Billing
HTTP(S) web server
RADIUS Accounting & Login
Remote firmware upgrade:
Auto code upgrade
Auto configuration upgrade
SNMP V1, V2 & V3
Syslog
TFTP/FTP support
VT100 – RS232
Telnet/SSH
TR-069
Voice readback of IP parameters
Routing & Numbering
Dial Planner – sophisticated call routing capabilities, standalone or gatekeeper/proxy integration
Direct Dialing In (DDI)
SIP registration to multiple proxies
Call Quality
Adaptive jitter removal
Comfort noise generation
Silence suppression
802.1p/Q VLAN tagging
Differentiated Services (DiffServ)
Type of Service (ToS)
QoS statistics reporting
Echo cancellation (G.168 up to 128ms)
Security & Encryption
Media – SRTP (Optional)
SIP – TLS (Optional)
Management – HTTPS, SSH Telnet
Configurable user login passwords
Enhanced Network Proxy (ENP) (Optional)
Hardware
Certification
EMC (Class A)
EN55022
EN55024
FCC Part 15
AS/NZS3548
VCCI
Safety
EMC (Class A)
EN60950
IEC60950
UL60950
AS/NZS60950
Telecoms
TBR21
FCC Part 68
CS-03
Protection
FXS port surge protection – K.20, K.21, GR1089
Environmental
0°..40°C
0%..90% humidity (non–condensing)
FXS Line Length
1500ohm, up to 8km
Indicators
LED:
Power
System ready
LAN: speed/activity
Physical Dimensions
440mm x 45mm (1.7″) x 250mm width/height/depth
Weight: 2.7kgs
Rackmount: brackets supplied 483mm (19″) 1U
Power
100..240 VAC, 47..63 Hz, 1..0.5 A for 24 ports or 100..240 VAC, 47..63 Hz, 2..1 A for 48 ports
-48V DC, 1.2A (Max) available subject to MOQ (Optional)