IMG 1010 - Unpacking

Retain all shipping materials in case you need to either relocate or re-ship the unit in the future. Use the packing materials to return the unit to the supplier; otherwise you may be charged for any damage that may occur during shipment.

Procedure

The IMG 1010 and supplied items are shipped in a single container. Carefully unpack as described below.

1. Open the container and remove the packing list.

2. Remove the protective cover and remove the IMG 1010 from the container.

3. Carefully remove the static protective bag.

4. Carefully inspect the IMG 1010. Should any discrepancies exist, contact your supplier representative immediately.
    

Supplied items

Review the packing list to ensure that the following items have been sent. Should any discrepancies exist, contact your supplier representative immediately.

AC Power Chassis

• AC power cord (AC option)

• Software CD ROMs
   

DC Power Chassis (IMG 1010 Only)

• DC power module plugs (2) (DC option)

• DC grounding lug (factory-installed on back of unit) (DC option)

• Software CD ROMs
   

Next Task

IMG 1010 - Rack Mounting or IMG 1010 - Surface Mounting