IMG 1004 - Default bootup.cfg

Owned by Kelli Higdon
Dec 15, 2023
1 min read

IMG 1004 - Default bootup.cfg

 

Default bootup.cfg Configuration File - IMG 1004

 

###################### # INSTRUCTIONS #1. Edit values as required, as described below. # Change IP Address, Subnet Mask, and Gateway IP Address to the actual values for the IMG 1004. # If you change the version of IMG System Software on the FTP Server or the SD card, make sure you change the System Software Filename value. # Make sure Host Flag is set appropriately for your configuration and Boot method # # Calculate Host Flag by adding values based on desired system attributes  # For a T1 system: add 0 # For an E1 system: add 2 # # To boot from a FTP Server: add 0 # To boot from a SD Card: add 32 # # For LBR codecs                  (128 ch/mod):add  0 # For LBR codecs + AMR + GSM      (120 ch/mod):add  8 # For LBR + ILBC codecs            (84 ch/mod):add 16 # For LBR + ILBC + Wireless codecs (84 ch/mod):add 24 # # An example host flag for a T1 system booting from the SD card with LBR + iLBC codecs would = 48 (0+32+16) # Change Server Address to the actual address of the FTP server. # The Server Name is not used at this time. # #2. After editing this file: save file, remove SD card, insert SD card in the IMG, power-#up the IMG. ######################    # IMG bootup configuration file # IP Address yiaddr=192.168.0.101    # Subnet Mask subnet mask=255.255.255.0    # Gateway Address giaddr=192.168.0.1    # System Software Filename file=img1004_ver1053132_id0106.bin    # Host Flag host flag=0x20   # Server Address for File transfer and SNTP operation. siaddr=192.168.0.100   # Server Name (Optional, not currently used) sname=factorydefault

 

 

Return to Documentation Home I Return to Sangoma Support