Effective September 30, 2026, these products will reach End of Sale and therefore will no longer be available for purchase. Effective September 2028, these products will reach End of Life. After this date, regular updates, maintenance, and technical support will be discontinued in accordance with our product lifecycle policy. For a complete list of the affected SKUs, click HERE. |
|---|
Dialogic IMG - IMG 1004 - Default bootup.cfg
Default bootup.cfg Configuration File - IMG 1004
######################
# INSTRUCTIONS
#1. Edit values as required, as described below.
# Change IP Address, Subnet Mask, and Gateway IP Address to the actual values for the IMG 1004.
# If you change the version of IMG System Software on the FTP Server or the SD card, make sure you change the System Software Filename value.
# Make sure Host Flag is set appropriately for your configuration and Boot method
#
# Calculate Host Flag by adding values based on desired system attributes
# For a T1 system: add 0
# For an E1 system: add 2
#
# To boot from a FTP Server: add 0
# To boot from a SD Card: add 32
#
# For LBR codecs (128 ch/mod):add 0
# For LBR codecs + AMR + GSM (120 ch/mod):add 8
# For LBR + ILBC codecs (84 ch/mod):add 16
# For LBR + ILBC + Wireless codecs (84 ch/mod):add 24
#
# An example host flag for a T1 system booting from the SD card with LBR + iLBC codecs would = 48 (0+32+16)
# Change Server Address to the actual address of the FTP server.
# The Server Name is not used at this time.
#
#2. After editing this file: save file, remove SD card, insert SD card in the IMG, power-#up the IMG.
######################
# IMG bootup configuration file
# IP Address
yiaddr=192.168.0.101
# Subnet Mask
subnet mask=255.255.255.0
# Gateway Address
giaddr=192.168.0.1
# System Software Filename
file=img1004_ver1053132_id0106.bin
# Host Flag
host flag=0x20
# Server Address for File transfer and SNTP operation.
siaddr=192.168.0.100
# Server Name (Optional, not currently used)
sname=factorydefault |