SNMP Support
- Kelli Higdon
Â
The IMG 2020 SNMP solution supports the RFC's displayed below. The MIB libraries are loaded into the server running the EMS application and all MIB libraries are located in the /opt/dialogic/common/snmp directory.
Â
RFC | Description |
|---|---|
Management Information Base for Network Management of TCP/IP-based internets:MIB-II. A collection of managed objects used to define SNMP entities within the SNMP architecture. | |
Management Information Base for Version 2 of the Simple Network Management Protocol (SNMPv2). | |
Definitions of Managed Objects for the DS0 and DS0 Bundle Interface Type. | |
An Architecture for Describing SNMP Management Frameworks. A collection of managed objects used to define SNMP entities. | |
The Interfaces Group MIB. Support for this MIB provides several benefits: * A view of control, signaling, and data ports.* Descriptive information about these ports.* Measurements of the flow of traffic including number of packets in and out.* Recording of errors such as numbers of packets dropped.Managers used to query the switch should update their list of compiled MIBs to include RFC 2863. | |
Definitions of Managed Objects for the Synchronous Optical Network/Synchronous Digital Hierarchy (SONET/SDH) Interface Type. | |
Alarm Management Information Base (MIB). Support for the alarm MIB offers these major benefits:* The ability to inspect the alarm tables and find out what is currently wrong with the system.* The ability to model alarms in a generic way.* The ability to send out generic traps when alarms are raised. | |
Definitions of Managed Objects for the DS1, E1, DS2, and E2 Interface Types. Defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes objects used for managing DS1, E1, DS2 and E2 interfaces. | |
Definitions of Managed Objects for the DS3/E3 Interface Type. Industry Standard MIB which enables monitoring of a DS3 trunk on the IMG 2020. |
Â
Â