Snom M100 KLE & Handset Reference Guide

Owned by Bob Young
Last updated: Jan 30, 2024
3 min read

About the M100 KLE 4-Line base station and handset

The Snom M100 KLE SIP DECT 4-Line Base Station with M10 KLE cordless handset is a cordless business phone system designed to work with popular SIP telephone (IP PBX) equipment and services. Once you have ordered and configured your SIP equipment or service, the M100 KLE and cordless accessories enable you to make and receive calls as you would with any other business phone.

The M100 KLE 4-Line base station features include:

  1. Registration of up to 8 DECT cordless handsets

  2. Up to 8 SIP account registrations

  3. Up to 4 active (concurrent) SIP sessions across all handsets and cordless desk phones 

  4. Shared call usage (held call pick up, call barge in to conference) on single SIP account among multiple users

  5. Power over Ethernet (PoE)

  6. Handset locator

  7. 1,000-entry base directory with entries shared on all registered handsets and desksets

The M10 KLE cordless handset features include:

  1. 4 dedicated Line keys for Key System experience

  2. Backlit Liquid Crystal Display

  3. Speakerphone, hold, intercom and mute capability

  4. Corded headset jack

  5. 3-way conferencing

  6. 200-entry call history

  7. 500-entry local directory

Base Station installation

Click the following link to download the installation guide:

M100 KLE SIP DECT 4-Line Base Station Quick Installation Guide.

M100 KLE 4-Line base station and handset features

1. Handset Locator (Page) button Press to ring the cordless accessories Press and hold to register cordless accessories.

2. Power LED (Power) Flashes when joining the network or when registering/ deregistering a cordless accessory. Steady when power is connected and an IP address is acquired.

3. SIP LED Flashes when registering/ deregistering a cordless accessory. Steady when all SIP accounts are registered. when a SIP account is not registered.

4. Antenna

5. AC adapter input

6. Reset button Press for 15 seconds to restore factory defaults. If the reset is successful, the SIP LED will flash s lowly.

7. Ethernet port

1. MESSAGES LED Flashes when a line has a new voice message.

2. HEADSET JACK 2.5 mm jack for connecting a corded headset.

3. SOFT KEYS Perform the actions indicated by the onscreen labels.

4. L1 - L4 Programmable keys, preprogrammed as line keys for accessing shared calls.

5. HOLD Press to put a call on hold..

6. DIR While in menus, press to scroll up the menu. Press to display the Directory.

7. MENU/SELECT Press to display the main menu. Press to select a menu item.

8. CID While in menus, press to scroll down the menu. Press to display the Call history.

9. OFF/CANCEL Press to end a call. Press to cancel an operation and leave a menu.

10.  INT Press to make an internal (intercom) call to another handset/deskset.

11.  VOLUME During a call: increase or decrease listening volume. When idle: increase or decrease ringer volume.

 

 

Return to Documentation Home I Return to Sangoma Support