S518 Installation

S518 ADSL Modem Telephony Card

View Datasheet  

Overview

The S518 is a fully integrated internal PCI ADSL modem card providing ultra-fast broadband access to the Internet.
It provides a fast, reliable and seamless broadband Internet connection at speeds up to 8 Mbps (megabits/second) downstream and 1 Mbps upstream.
The high bandwidth ADSL is ideal for Internet sharing, where multiple users can all share the same Internet connection.
The S518 is fully supported under Linux and Windows®.

Hardware Installation

Compatibility Note 

Sangoma Telephony cards are designed to be compatible with most commercially available motherboards.

PCI details

• Autosense compatibility with 5 V and 3.3 V PCI buses

• Maximum operational power for PCI: 3 W (0.6 A @ 5 V) For PCI Express: 2.5 W (0.76 A @ 3.3 V)

Faceplate

Sangoma Telephony cards ship pre-installed with 1 U faceplate, along with a 2 U faceplate as accessory.

If you have a 2 U server, the 1 U faceplate will need to be removed to install the 2 U faceplate.
If this is your case, please view the following Demo which indicates which screws to remove and how to separate the card 

Server requirements

• Intel Pentium PC, 120 Mhz with 1 spare PCI slot and 1 spare Interrupt (IRQ) line

• Linux 2.2/2.4 or Windows NT 4.0/98/ME/2K/XP operating systems

• ADSL line

Telephony card installation is very simple:

1. Power off server and remove cover to access the PCI

2. Identify the PCI slot to be used for your telephony card

3. Remove the backplate for that slot, from the server. 

   1. This backplate may require screwdriver to remove screws before pulling off the backplate. Use your discretion

4. Insert the telephony card into the PCI slot and verify it is firmly seated

5. With the faceplate lines up with the mounting bracket, screw it firmware in place.

6. Place server cover back on and power on

Software Installation

Select your Installation type:

• Install with API