Set Up e911

Once your system has been set up after purchase and you log into the PBXact Cloud Store, you will need to set up E911.

You will notice a warning that you need to set up e911.  Until you do so, you will not be able to do anything else with your PBXact Cloud Location.  

• Press the red Add E911 Address button as shown below:

  Open

  

   

Provide the physical address that you want us to register anytime someone dials 911 from your main number.  Your primary number is shown at the top of the form.

• You can change which number is your primary DID from the Numbers section.

Press Save E911 when done.
 

You can now log into your PBX Admin and set up your PBX.