T3Mux M13 Multiplexer
- Kelli Higdon
Introduction
Introducing Sangoma's new M13 multiplexer that can rearrange a DS3 framing signal into 28 T1 framing. Sangoma offers this cost-effective and reliable solution, consistent with the quality and affordability of its other product families.
A DS3 will reduce overall expenses and control costs by combining data and voice applications over one circuit. The benefits can be reaped as soon as you subscribe to more than 8 T1 circuits simultaneously.
The T3Mux offers a simplified and user-friendly management console accessible via Ethernet or RS232. It features a VT100 terminal interface for system manage-ment, DS1 and DS3 Interface configuration.
DS3 Interface via BNC Coax
T1 Interface via RJ-45 Connectors
Simple Console Management Configuration via Ethernet and RS232 Interface
M13 and C-bit signalling support
External DS3 clock option
B8ZS and AMI DS1 signalling support
Industry standard CSU and NIU loopback codes
Requires only 10W from external power adapter
T3Mux RJ45 Connector Specs
T3Mux contains 14 RJ45 Ports, and each carries 2 T1 lines. Total 28T1 lines
First 4 wires of RJ45 connector are used for 1st T1 port and second 4 wires of RJ45 connector are used for 2nd T1 port.
For each RJ45 connector the T1 ports mappings are:
Port: [01,02] [03,04] [05,06] [07,08] [09,10] [11,12] [13,14]
[15,16] [17,18] [19,20] [21,22] [23,24] [25,26] [27,28]