IMG 1010 - ISDN Features

 

Basic Support

  • Gain Control on ISDN Channel Groups

  • 32 D-Channels per IMG over T1/DS3

  • 24 D Channels over or E1 (21 bearer + 3 signaling spans)

  • ITU-T Q.921, Q.931-based

  • Incoming B channel Negotiation

  • Bearer Capabilities Override (see IMG 1010 - Bearer Capabilities Override)

Supported Variants

T1 Network Side Variants

  • National-ISDN 2

  • ATT 4ESS Q.931 PRI

  • ATT5ESS Q.931 PRI (Custom)

  • Northern Telecom DMS-100 Q.931 PRI (Custom)

  • Northern Telecom DMS-250 Q.931 PRI

  • JATE

  • Net5 Q.931 (10.3.3 ER2)

T1 User Side Variants

  • ATT 4ESS Q.931 PRI  User Side

  • ATT 5ESS Q.931 PRI (Custom) User Side

  • Northern Telecom DMS-100 Q.931 PRI (Custom) User Side

  • Northern Telecom DMS-250 Q.931 PRI

  • National-ISDN 2

  • JATE

  • Net5 Q.931 (10.3.3 ER2)

E1 Network Side Variants

  • Euro-ISDN

E1 User Side Variants

  • Euro-ISDN

D channel backup

The IMG supports the D channel backup procedure as defined by Lucent TR 41459. This procedure provides a standby D channel when using NFAS. When an active D channel fails, or if there is a span alarm, the IMG converts to the standby D channel and maintains active calls. This is a provisioned option and is applicable only when using NFAS. D channel backup is supported on the T1 only.

NFAS

NFAS is supported over T1 with the NI-2, 4ESS/5ESS, and DMS 100/250 variants. It is not supported over E1 with the Euro ISDN variant, or over T1 with the JATE variant.

Interworking

ISDN to SS7 ISUP, SIP, and H.323

 

Return to Documentation Home I Return to Sangoma Support