| Table of Contents |
|---|
Administration GUI
Here you can give a user administrative access to your PBX. You can control the user's level of privileges
...
Allow Administration Login
Use the Yes / No / Inherit buttons to select whether this user can log in to the PBX Administration pages.
Grant Full Administration Rights
Use the Yes / No / Inherit buttons to select whether to grant this user full administration rights regardless of extension range or module access as defined below. This will override the Visible Extension Range and Administration Acsess restrictions below and give the user access to everything in the admin interface.
Visible Extension Range
(Optional) Enter a starting number and ending number if you want to restrict this user's view to only the extensions, ring groups, and queues within this range. You can only enter one range.
Administration Access
Select the Admin Sections this user should have access to. The default is None selected. If you need to grant access to modules, click the None selected button to bring up a drop-down menu. Then either click the check box next to Select all (for all modules), or click the check box(es) next to the module(s) this user will be allowed to access.
If you grant access to modules, the area next to "Administration Access" will change to show you the modules selected (or a quantity, if several are selected).
...
Conferences
Allows auto creating a conference room for each user and adding the conference room into the built in conference IVR on the PBX
...
Link Conference to this user
Use the Yes / No / Inherit buttons to select whether we will auto create a conference room for this use
If set to Yes
The conference room will show up in the Conference module in your PBX
Conference room will be created as 8 plus the users primary extension number. Our example this user has a primary extension as 4000 so the auto creating conference room will be 84000.
The default prefix of 8 for auto created conference rooms can be changed from within the Conference Pro module.
If set to No
We will not auto create a conference room for this user.
Add to Conference IVR
Use the Yes / No / Inherit buttons to select whether we will auto create a conference room for this use
If set to Yes
This will auto add the users conference room to the built in conference IVR.
Any inbound calls routed to this IVR can dial this users conference room if this selection is set to yes
If set to No
The Conference room will not be added to the built in conference IVR
...
Allows you to setup which contact groups this user will be shown in and which contact groups the user can see.
...
Show in Contact Manager Groups
Allows this contact to be shown in the following contact groups.
The details of this contact that will be shown to other user are based on what is entered in the User Management Module User Guide#User Details section above
Contact groups are created by the PBX Admin in the Contact Manager module.
Contacts can be viewed from the following applications
Zulu with version 2.2.0 (coming soon)
Viewable Contact Manager Groups
Contact Groups this user can view from within the following applications
Zulu with version 2.2.0 (coming soon)
XaxtView and iSymphony
...
Add to XaxtView or iSymphony
Yes/No/Inherit: Grant access to this user to allow them to login to XactView or iSymphony Operator panels
If set to Yes the user will be able to Login to XactView or iSymphony
User will Login with the Login information from User Manager as defined in the Login Details of User Manager aboveUser guide
If set to No the user will not have permissions to login to XactView or iSymphony
...
| Info |
|---|
You will only have the options "Enabled" and "Attachment Format" if you have not purchased a Fax Pro license |
...
Enabled
Yes/No/Inherit: Whether to enable fax for the user.
If set to Yes
Allows the user to be setup to receive inbound faxes from Inbound Routes as a Fax recipient
Inbound faxes can be emailed to the user along with viewed in UCP and or Zulu
Allows the user to also have the ability to send outbound faxes from UCP and Zulu
If set to No
User will not be able to send or receive faxes
Attachment Format
The format to convert the incoming fax file to before e-mailing it.
The user will receive the inbound fax to the email address as defined in their User Management Module User Guide#User Details section above
Store Locally
Yes/No/Inherit: Whether faxes will be stored by the server and be accessible via the User Control Panel (UCP) and Zulu
If set to yes all inbound and outbound faxes will be stored on the server.
If set to no when a inbound fax is received ti will be emailed to the user then erased.
Outgoing Station ID
Outgoing Header
Coversheet name
Coversheet Tel
The phone number that will appear on the cover sheet when sending the fax from UCP and Zulu
The template of the coversheet is controlled by the PBX Admin as outlined in the Fax Configuration module guide here.
Coversheet Email
The email address that will appear on the coversheet when sending the fax from UCP and Zulu
The template of the coversheet is controlled by the PBX Admin as outlined in the Fax Configuration module guide here.
Email Results
When to email the results of an outgoing fax. Email will be sent to the email address as defined in their User Management Module User Guide#User Details section above. Options include;
Never - Never email the results of a outgoing fax.
Always - Always email the results of outgoing fax
On Success - Only email the results when the fax is sent successful
On Failure - Only email the results when a fax fails to be sent successfully and all retry attempts below have been exhausted.
User Global Settings uses whatever setting is defined in the Fax Configuration module as outlined here by the PBX admin.
Retries
Number of times to retry sending a failed fax. Similar to redial on a normal fax machine.
Options between 0 and 3 retries can be set.
User Global Settings uses whatever setting is defined in the Fax Configuration module as outlined here by the PBX admin.
Phone Apps
Phone Apps section is where you can control the permissions of all Phone Apps for your users and is broken into many sub tabs
General
...
Allow Access
Yes/No/Inherit: Grant access to Phone Apps for this user.
If set to No the user will globally be blocked from accessing phone apps on their phones.
Override Apps Menu
Yes/No/Inherit: to control if you want to restrict what apps show up when a user presses the Phone Apps button on their phone.
By default if set to no the user will see all apps listed. Their permissions for each app is still restricted based on permissions you set in all the sub tabs here.
Maint Menu
If setting Override Apps Menu is set to Yes here is where you can restrict which apps will show up when they press the Apps Button.
If settings Override Apps Menu is set to No then the Main Menu settings will have no effect here.
Conferences
...
Enable Conference Access
Yes/No/Inherit: Grant access to this user to have access to this phone app.
If set to Yes the user when pressing the Conference App will see a list of conference rooms as defined below.
If set to No the user when pressing the Conference App will receive a error that they do not have permission for this app
Allowed Conference Bridges
List of Conference Bridges this user can see. You can define 1 or more options below. Options include;
All - Will give them access to see all conference rooms on the PBX
User Linked Conference - Will give them access to the Auto created conference room for this user as defined Conferences section of User Manager above.
Any specific Conference Room defined
...
Queues
...
Enable Queue Access
Yes/No/Inherit: Grant access to this user to have access to this phone app.
If set to Yes the user when pressing the Queues App will see a list of Queues as defined below.
If set to No the user when pressing the Queues App will receive a error that they do not have permission for this app
Enable Queue Agent Access
Yes/No/Inherit: Grant access to this user to have access to this phone app.
If set to Yes the user when pressing the Queues Agent App will see a list of Queues that they are a member of based on the queue agent list inside each defined queue in the PBX Queue Admin module where you define static and dynamic agents.
If set to No the user when pressing the Queues Agent App will receive a error that they do not have permission for this app
Allowed Queues
List of Queues this user can see when pressing the Queues App only. This setting has no effect on the Queues Agent App as outlined above. You can define 1 or more queues below. Options include;
All - Will give them access to see all queues on the PBX
Any specific queue defined
Time Conditions
...
Enable Time Condition Access
Yes/No/Inherit: Grant access to this user to have access to this phone app.
If set to Yes the user when pressing the Time Condition App will see a list of Time Conditions as defined below.
If set to No the user when pressing the Time Condition App will receive a error that they do not have permission for this app.
Allowed Time Conditions
List of Time Conditions this user can see when pressing the Time Conditions App. You can define 1 or more queues below. Options include;
All - Will give them access to see all Time Conditions on the PBX
Any specific Time Condition defined
Call Flow Control
...
Enable Call Flow Control Access
Yes/No/Inherit: Grant access to this user to have access to this phone app.
If set to Yes the user when pressing the Call Flow Control App will see a list of Call Flow Controls as defined below.
If set to No the user when pressing the Call Flow Control App will receive a error that they do not have permission for this app.
Allowed Call Flows
List of Call Flows this user can see when pressing the Call Flow App. You can define 1 or more queues below. Options include;
All - Will give them access to see all Call Flow Controls on the PBX
Any specific Time Condition defined
.jpg?version=1&modificationDate=1705422348489&cacheVersion=1&api=v2&width=200)
Voicemail
...
Enable Voicemail Access
Yes/No/Inherit: Grant access to this user to have access to this phone app.
If set to Yes the user when pressing the Voicemail App will be able to manage their voicemail settings and messages.
If set to No the user when pressing the Voicemail App will receive a error that they do not have permission for this app.
Parking
...
Enable Parking Access
Yes/No/Inherit: Grant access to this user to have access to this phone app.
If set to Yes the user when pressing the Parking App will be able to view all parked calls on the PBX.
If set to No the user when pressing the Parking App will receive a error that they do not have permission for this app.
Other Apps
...
Enable Contact Access
Yes/No/Inherit: Grant access to this user to have access to this phone app.
If set to Yes the user when pressing the Contact App will see a list of Contact Groups that they have been given permissions to view as defined in User Manager Contacts section above.
If set to No the user when pressing the Contact App will receive a error that they do not have permission for this app.
Enable Presence State Access
Yes/No/Inherit: Grant access to this user to have access to this phone app.
If set to Yes the user when pressing the Presence App will be given access to change and manage their status.
If set to No the user when pressing the Presence App will receive a error that they do not have permission for this app.
Enable Fine Me/Follow Me Access
Yes/No/Inherit: Grant access to this user to have access to this phone app.
If set to Yes the user when pressing the Follow Me App will be given access to the manage their Follow Me settings.
If set to No the user when pressing the Follow Me App will receive a error that they do not have permission for this app.
Enable DND Access
Yes/No/Inherit: Grant access to this user to have access to this phone app.
If set to Yes the user when pressing the DND App will be given access to the manage their Do Not Disturb settings.
If set to No the user when pressing the DND App will receive a error that they do not have permission for this app.
Enable Call Forward Access
Yes/No/Inherit: Grant access to this user to have access to this phone app.
If set to Yes the user when pressing the Call Forward App will be given access to the manage their Call Forwarding settings.
If set to No the user when pressing the Call Forward App will receive a error that they do not have permission for this app.
Enable Login/Logout Access
Yes/No/Inherit: Grant access to this user to have access to this phone app.
If set to Yes the user when pressing the Login App will be given access to Login and Logout of devices to move to different desk or devices with Hot Desking
If set to No the user when pressing the Login App will receive a error that they do not have permission for this app.
...
Allows linking PBX users to CRM users as part of the CRM Pro module.
...
Link to CRM User
Pick from the drop which CRM user this PBX User shall be linked with.
Used for being able to show in the CRM which users received calls in the Call History.
...
Allows creating VPM clients for users. Requires you to setup the VPN server in System Admin module first as outlined here.
...
Auto Create & Link
Yes/No/Inherit: Create a VPN client for this user and link it with this user.
If set to Yes and we will create a VPN client for this user.
The VPN client can then be shared with the user from UCP to download the client and certificate under the UCP System Admin Section of User Management as outlined here.
The VPN client can be linked in End Point Manager to send VPN information to Sangoma Phones as outlined here.
If set to No the user will not have a VPN Client created for this user
...
User Control Panel (UCP) is a user interface for the PBX. This section has several tabs that control a user's privileges in UCP.
General
...
Allow Login
Use the Yes / No / Inherit buttons to select whether this user is allowed to log into the User Control Panel (UCP).
Active Sessions
If a user is currently logged into UCP, you will see the IP address(es) of the active session(s). To log-out or "boot" a user from a currently active session, you can click the trash can icon
next to the session. On the user's end, they will be required to login again to get back in.
Miscellaneous
...
Allowed Extension Settings
The user will be able to edit settings such as call waiting, call forwarding, find me/follow me, and others for these extensions. Select an extension by clicking in the field. A menu of available extensions will show up. Click on an extension to select it. Repeat the process if you would like to add multiple extensions.
...
Enable Originating Calls
Use the Yes / No / Inherit buttons to select whether this user is allowed to originate calls from within UCP. This is not the same as WebRTC.
Allows you to type in a Phone Number and when you press call your Desk Phone will ring. When you answer you Desk Phone a call will be placed to the number you entered above.
...
View this wiki on more information about the Appointment Reminder module.
...
Call History and Call Event Logging
| Note |
|---|
Call History is for Asterisk 11 or older, Call Event Logging is for Asterisk 13 or newer |
Allow CDR
Use the Yes / No / Inherit buttons to select whether to allow the user to access Call Detail Records (CDR) for one or more extensions.
CDR Access
Enter the extension(s) whose CDR data this user will be able to view.
Allow CDR Playback
Use the Yes / No / Inherit buttons to select whether to allow this user to play call recordings in UCP.
Allow CDR Downloads
Use the Yes / No / Inherit buttons to select whether to allow users to download call recordings in UCP.
Conferences
...
Enable Conference Access
Use the Yes / No / Inherit buttons to select whether to allow this user to access conferences in UCP.
Allowed Conference Bridges
Select which conference bridge(s) the user will be able to access in UCP. Click in the field to display a drop-down list of available conferences. Click on a conference's name to select it. Repeat the process to select multiple conference bridges.
...
End Point Manager
...
Allow Endpoint
Use the Yes / No / Inherit buttons to allow the user to control the buttons on their phone and override what the Admin has setup for program key layouts on their desk phone.
Endpoint Access
Which extensions this user can change buttons on from UCP. Click in the field to display a drop-down list of available Extensions. Click on a Extensions name to select it. Repeat the process to select multiple Extensions
...
Presence State
...
Enable Presence
Use the Yes / No / Inherit buttons to select whether to enable presence. Enabling presence allows a user to select their presence state from a drop-down menu in UCP, which changes call behavior according to the selected state. You can customize the available presence states in the Presence States module. For more information on what this means, see our wiki What is Presence?
SIPStation SMS
...
Allow SMS
Use the Yes / No / Inherit buttons to allow the user to view and send SMS messages
SMS Assigned DIDs
Select the DID(s), if any, that you would like to give this user access to for text messaging (SMS) within UCP. By default, none are selected. To add a DID, click the None selected button and choose one or more DIDs from the drop-down menu.
System Admin
...
Allow VPN
Use the Yes / No / Inherit buttons to allow the user to download any VPN certificates that have been generated for the user from the VPN Section of User Management as defined above.
...
Enable Voicemail Access
Use the Yes / No / Inherit buttons to select whether this user can see the voicemail section within UCP.
Allowed Voicemail
Enter the extension(s) whose voicemail this user will be able to access.
Allow Voicemail Playback
Use the Yes / No / Inherit buttons to select whether this user can listen to voicemails from UCP
Allow Voicemail Download
Use the Yes / No / Inherit buttons to select whether this user can download voicemails from UCP
Allow Voicemail Settings
Use the Yes / No / Inherit buttons to select whether this user can change their own voicemail settings
Allow Voicemail Greetings
Use the Yes / No / Inherit buttons to select whether this user can record and change their voicemail greeting from UCP
Allow VmX Locator Settings
Use the Yes / No / Inherit buttons to select whether this user can enable and manage their own VmX locator settings.
See VmX Locator section of Extension module for more information on this feature.
WebRTC
...
WebRTC, or Web Real-Time Communication, is a technology that enables browser-to-browser voice calls and other services such as video chat and P2P file sharing. You can enable WebRTC to allow users to make web-based phone calls in UCP.
You may see an error message "The STUN Server address is blank. In many cases this can cause issues. Please define a valid server in the Asterisk SIP Settings module." If you see this error, you can refer to our wiki STUN Servers for a list of STUN servers, and enter one in the Asterisk SIP Settings module under the WebRTC Section.
Enable WebRTC Phone
Use the Yes / No / Inherit buttons to select whether to enable
This will create a WebRTC phone for this user linked to their primary extension.
Anytime a call is rexeiced on their primary extension this WebRTC phone will be called
Any calls made from this WebRTC phone will follow the same rules as your primary Extension for Caller ID, Class of Service and Outbound Route rules.
WebRTC Certificate
Select a certificate from the drop-down menu. This is the certificate the phone will use for this user and should generally be left at default unless you want to create unique SSL certs per user in Certificate Manager module of your PBX
Zulu
...
Enable Zulu tab
Use the Yes / No / Inherit buttons to allow the user to download Zulu Desktop client
...
If enabled we will create a XMPP user.
You can login to the XMPP server with any XMPP client using the Users User Manager Username and Password
Enabling this will also provide a Chat client automatically inside of UCP and expose in Zulu the chat client.
Enabled
Use the Yes / No / Inherit buttons to select whether the user has access to XMPP in UCP.
If enabled, the user can log in to the XMPP server using "<username>@<host>" as the user name. The <username> part is the Login Name defined in the Login Details tab described earlier in this wiki. The <host> part is your PBX IP or FQDN
...
This section controls permissions related to the Zulu the Zulu Application for your user
...
Users
Show how many users have been configured for Zulu and how many remaining user licenses your have left.
Enabled
Allows this user to login to Zulu using the login information from User Manager as defined in the Login Details of User Manager above
Enable Fax
Allows the user to see the Fax Menu option in Zulu
Still requires the user to have Fax Settings enabled in the Fax Section of User Management as defined above
Enable SMS
Allows the user to see the SMS Menu option in Zulu
Still requires the user to have DIDs enabled in the SIPStation SMS section of UCP as defined above
Enable Softphone
Allows the user to see the SoftPhone Menu option in Zulu