PBX GUI - System Admin-Storage
- Nathaniel Halbrooks
- Merry Arpaia
THIS WIKI HAS BEEN UPDATED FOR VERSION 13 OF YOUR PBX GUI
Overview
The Storage page displays hard disk drive usage and will send an email to the notification address when disk space is as per the Storage Threshold 1 & Storage Threshold 2.
Logging in
On the top menu click Admin
In the drop down click System Admin
In the right side navigation box click Storage
RAID is not configured in this example:
Raid Status
Status of drives that are part of Software Mirror RAID (if any).
Drive Usage
Shows disk space usage for a given device, in the format of space used / total space (percentage used).
Failure Notifications Email
The email address you would like drive failure notices sent to.
APPLICATION NOTE
E-mails are only sent when the following events occur: Fail, FailSpare, DegradedArray, and TestMessage.
Storage Threshold 1
First level storage threshold(%) to send email notifications
Threshold 1
E-mails are sent when the disk space reaches or exceeds the first level storage threshold percentage.
Email Frequency 1
Frequency to send email notifications for first level threshold
Frequency 1
E-mails are sent on basis of frequency(hourly, daily, weekly, monthly) when disk space reaches or exceeds the first level storage threshold percentage.
Storage Threshold 2
Second level storage threshold(%) to send email notifications
Threshold 2
E-mails are sent when the disk space reaches or exceeds the second level storage threshold percentage.
Email Frequency 2
Frequency to send email notifications for second level threshold
Frequency 2
E-mails are sent on basis of frequency(hourly, daily, weekly, monthly) when disk space reaches or exceeds the second level storage threshold percentage.