A-Phone Configuration via Web Interface

This article provides the steps to register an A-Series Phone using its web interface.

There are additional provisioning options, including using the Phone Interface or an XML file.
You may also wish to visit the A-Series IP Phones for Asterisk Overview for additional information and links to related articles.

How to register an Asterisk A-Series Phone through the web interface

Step 1.- First you'll need to locate the IP address of Asterisk phone: 

           -To locate the IP address go to Menu>Status from the phone itself

Open

Open

Step 2.- Once you have the above info, open up a web browser and enter the IP Address of the Asterisk phone in the Address Bar. It should prompt you to log in,

             Use the following credentials: 

1. Username: admin

2. Password: 789

Step 3.-  Select the Options Line on the left side

              Will change to new screen, and the tab for SIP on top would be selected, we will fill the following fields:

Line: SIP 1 ( or whatever line number you want to go configure)
                         Username: Ext number
                         Display name: Ext number
                         Authentication Name: Ext number
                         Authentication Password: Phone password (this is not the web UI password or voicemail password)
                         SIP Proxy Server Address: IP address of the PBX
                         Activate: Select it or put a check mark on it. 
                         SIP Proxy Server Port: 5060 (default)
                         Backup Proxy Server Port: 5060 (default)

                         Click on Apply