Open Source - FAQ
- Open Source - How do I blind transfer on a Polycom VVX phone?
- Open Source - D80 Stuck in Boot Loop
- Open Source - How to change the background image on your Polycom VVX model phone
- Open Source - How to reset Polycom SoundPoint 6000 Phone to Factory Defaults
- Open Source - Are Sangoma phones hearing-aid compliant?
- Open Source - How to correct the date and time on a Polycom phone?
- Open Source - Why Won't Asterisk Disconnect a Call Over Analog Lines?
- Open Source - How Do I Setup A Sangoma Phone To Auto-answer On Speakerphone?
- Open Source - How Do You Change The Default Password on a Polycom Phone?
- Open Source - Why Does My Sangoma Phone Download The Configuration File But Fails To Register?
- Open Source - How do I set up my Sangoma phone to display my Rapid Dial Contacts?
- Open Source - How to reset Polycom phones to factory device settings
- Open Source - How to redial from missed calls on Polycom or Sangoma phones
- Open Source - What do you do if you restore a backup and your Dphone tries to connect to the old IP?
- Open Source - Why Cant I Blind Transfer Using Rapid Dial Keys?
- Open Source - What can I do if my Sangoma Phone is stuck in a boot loop and it is PoE?
- Open Source - Why Can't I See The Image On My Sangoma Phone?
- Open Source - How to check RAID status using SNMP
- Open Source - How To Conference with Sangoma Phones
- Open Source - How to collect an Asterisk Debug Capture
- Open Source - How to configure a Sangoma SIP Trunking account with Asterisk using chan_sip
- Open Source - How to configure a Sangoma SIP Trunking account with Asterisk using chan_pjsip
- Open Source - How to configure a Sangoma SIP Trunking account with AsteriskNOW and FreePBX
- Open Source - How to configure a Sangoma E1 PRI card
- Open Source - How to create a sound file?
- Open Source - How to create a single DID route
- Open Source - How do I disable echo cancellation module without removing the hardware?
- Open Source - How do I register my Telephony Interface Card?
- Open Source - How do I change the packetization (chunk size in ms) for G.729a or other codec?
- Open Source - Using the register utility on a 64bit-only system
- Open Source - May I re-register my Free Fax for Asterisk (FFA) license key?
- Open Source - Can SpanDSP and FaxForAsterisk coexist in the same asterisk implementation?
- Open Source - How do I connect an AsteriskNOW system with FreePBX to a Sangoma gateway?
- Open Source - How do I record calls using dahdi_monitor?
- Open Source - How to correct Asterisk Ending With Exit Status 1
- Open Source - How to Download and Compile Asterisk on CentOS
- Open Source - How to Download and Compile DAHDI on CentOS
- Open Source - How to Download and Compile Libpri
- Open Source - How to Install the necessary CentOS Dependencies
- Open Source - How to share queues with two or more Asterisk systems
- Open Source - Why doesn't Acknowledge call work with analog lines?
- Open Source - How to run an Asterisk Command Line Interface (ACLI) debug
- Open Source - How to enable the Asterisk Manager Interface (AMI)
- Open Source - How to use an Asterisk callfile
- Open Source - How to run a packet capture in an Asterisk system (tcpdump)
- Open Source - How do you install AsteriskNOW without FreePBX?
- Open Source - How do I completely remove Asterisk and DAHDI installed from source?
- Open Source - How to Disable Fax For Asterisk
- Open Source - How do you run DAHDI monitor?
- Open Source - Why am I unable to set my status?
- Open Source - Does Asterisk include a desktop client or web client for sending & receiving faxes?
- Open Source - Fax For Asterisk FAQ
- Open Source - How do I move my Sangoma software license to a new server?
Return to Documentation Home | Sangoma Support