/
How to Enable Asterisk Full Debugging
How to Enable Asterisk Full Debugging
- Nathaniel Halbrooks
Owned by Nathaniel Halbrooks
Jan 08, 2024
Analytics
Loading data...
To enable Asterisk full debugging:
vi /etc/asterisk/logger.conf |
uncomment this line:
full => notice, warning, error, debug, verbose, dtmf, fax
And all Asterisk debugging information will be logged to /var/log/asterisk/full.
Include /var/log/asterisk/full when submitting tickets to Sangoma Technical Support.
Related content
How to stop "CT_C8_A clock behavior does not conform to the H.100 spec!" messages from printing in the system's log
How to stop "CT_C8_A clock behavior does not conform to the H.100 spec!" messages from printing in the system's log
Read with this
Open Source - How to collect an Asterisk Debug Capture
Open Source - How to collect an Asterisk Debug Capture
More like this
Cards on Different servers issues - issues
Cards on Different servers issues - issues
Read with this
Open Source - How to run an Asterisk Command Line Interface (ACLI) debug
Open Source - How to run an Asterisk Command Line Interface (ACLI) debug
More like this
Card not detected in system when using LSPCI command
Card not detected in system when using LSPCI command
Read with this
Support Logger
Support Logger
More like this