Packet Facility Service State Specifications
- Kelli Higdon
The Packet Facility Service State Specification object allows a user to both monitor and provision either an individual Packet Facility/IP Port or a Range of Packet Facility/IP Ports. To open and display the Packet Facility Service State Specification object, click on one of the Packet Facility/IP Ports displayed in the Object Table Tab of the Packet Facility object (Created under the Packet Facilities object). This will display the individual Packet Facility/IP Port along with a set of provisioning buttons. The same set of buttons can also be accessed by right clicking on an individual Packet Facility/IP Port that is displayed in the object table tab. See information below.
Web GUI Page
Dialogic > IMG 2020 > Facility > Packet Facilities > Packet Facility > Select IP Port in the object Table
Maximum Objects
One Packet Facility Service State Specification object will be displayed for each individual Packet Facility/IP Port selected in the Object Table.
Related Topics and Dependencies
The Packet Facility Service State is accessed through the Packet Facility Object Table Tab.
Field Descriptions
RTP Offset
Displays the value of the RTP Offset that is selected in the Object Table Tab.
Channel Status
Displays the status of the Packet Facility/IP Port that is selected in the Object Table. (In Service Idle, Out Of Service)
Buttons
In Service - Brings the selected Packet Facility/IP Port into service from an Out of Service State.
Out Of Service - Takes the selected Packet Facility/IP Port out of service.