/
Grandstream IP Phone configuration for Connect service

Grandstream IP Phone configuration for Connect service

  1. Locate your phones IP address:

    1. BT 200: Press the "Menu" button, scroll down to "ip address", click "menu" again
      *Note: Ignore leading zeros: 010.010.010.089 becomes 10.10.10.89.

    2. GXP 2000: The IP is displayed at the bottom of the main screen

  2. Open web browser, navigate to your phones IP address

  3. Enter the password “admin” and click “Login”

  4. Locate the Firmware Upgrade and Provisioning section and set the following options:

    1. Upgrade Via: “HTTP”

    2. Firmware Server Path: “cp.fonality.com/phone_configs/”

    3. Config Server Path: “cp.fonality.com/phone_configs/”

      grandstream_advanced_boot_config_firmware_http_cp_fonality_com_phone_configs_server.png
  5. At the bottom of the screen, click “Update”, and then “Reboot” on the next screen.

Related content

Grandstream Phones
Grandstream Phones
More like this
Supported Devices-Grandstream
Supported Devices-Grandstream
More like this
Supported Devices-Cisco
Supported Devices-Cisco
More like this
Configuring a Grandstream GXW-410X Device to act as an FXO Gateway
Configuring a Grandstream GXW-410X Device to act as an FXO Gateway
More like this
Aastra IP Phone Configuration for Connect service
Aastra IP Phone Configuration for Connect service
More like this
Phones - Setting Configuration Server
Phones - Setting Configuration Server
More like this

Return to Documentation Home I Return to Sangoma Support