Property Manager Module Installation
- Nathaniel Halbrooks
Sangoma Property Manager is already pre-installed on FreePBX and PBXact systems on version 13.XXX and above and requires no installation.
Only follow the below installation steps if your FreePBX and/or PBXact system is below the above stated version. To identify your system version please reference System Admin - Updates
Please remember to set your timezone.
Within the PBX GUI, navigate to Admin > Module Admin
Select the Commercial repository and click Check Online. This will force your system to search for the Property Manager Module on Sangoma's Online Repository
Your system will require internet access for this step
Navigate to Property Manager
Expand the menu item and click on Install
Scroll to the very bottom of the Module admin and click on Process
Click Confirm to proceed on the next window
A status screen will appear. Once completed, click return
Back at the PBX GUI click on the Apply Config at the top right of the screen, which should be in red colour
The Sangoma Property Manager Module is now installed. To Verify, Navigate to Applications and notice Sangoma Property Manager in the list
Please proceed to Sangoma Property Manager Getting Started
