Bluetooth Setup
Bluetooth is only supported on the Sangoma s705 IP Phone
Enabling Bluetooth
Â
Press the Menu button
Use the arrow buttons to highlight the Setting option, then press the Enter button
Highlight the Basic Setting option and press the Enter button
Use the arrow buttons to highlight the Bluetooth option (near bottom of the list), then press the Enter button
By default bluetooth will be disabled.
To enable Bluetooth use the Switch button to toggle bluetooth On.  Then press the Save buttonThe phone will save settings and enable Bluetooth
At this point, the Bluetooth feature is enabled but not paired with any bluetooth devices (as noted by the small red x).
To pair with a bluetooth device follow the next steps
Pairing with a Bluetooth Device
Verify that your bluetooth device is enabled in paring mode, then follow the below procedure
Press the Menu button
Use the arrow buttons to highlight the Setting option, then press the Enter button
Highlight the Basic Setting option and press the Enter button
Use the arrow buttons to highlight the Bluetooth option (near bottom of the list), then press the Enter button
Use the down arrow key and highlight Paired Bluetooth Device, then press the Scan button
The phone will now search for nearby bluetooth devices/headsets to pair withOnce you have selected the bluetooth device you wish to pair with, press the Connect buttonÂ
The bluetooth device is now paired with the Sangoma phone, as noted by the blue checkmark beside the bluetooth device
The home screen will also indicate bluetooth connectivity with the bluetooth symbol
Disconnecting from a Bluetooth Device
Â
Press the Menu button
Use the arrow buttons to highlight the Setting option, then press the Enter button
Highlight the Basic Setting option and press the Enter button
Use the arrow buttons to highlight the Bluetooth option (near bottom of the list), then press the Enter button
Using the arrow buttons highlight the bluetooth device you wish to disconnect from, then press the Disconnect button
Â
Â