WiFi Setup
Â
WiFI is only supported on the Sangoma s705 IP Phone
For WiFi-only Setup the external AC Power adapter is required (sold separately)
Enabling Wi-Fi
Press the Menu button
Use the arrow buttons to highlight the Setting option, then press the Enter button
Highlight the Basic Setting option and press the Enter button
Use the arrow buttons to highlight the Wi-Fi option (near bottom of the list), then press the Enter button
By default, Wi-Fi should be set to Manual Mode. Press the Enter button
To enable Wi-Fi use the Switch button to toggle Wi-Fi On. Then press the Save button
The phone will save settings and reboot in order to activate Wi-Fi
Once the phone has rebooted, a small Wi-Fi icon will be displayed at the top of the home screen
At this point, the Wi-Fi feature is enabled but not connected to any Wi-Fi networks (as noted by the small red x).
To connect to a Wi-Fi network follow the next steps
Connecting to Available Wi-Fi Network(s)
Press the Menu button
Use the arrow buttons to highlight the Setting option, then press the Enter button
Highlight the Basic Setting option and press the Enter button
Use the arrow buttons to highlight the Wi-Fi option (near bottom of the list), then press the Enter button
By default, Wi-Fi should be set to Manual Mode. Press the Enter button
Use the down arrow button to highlight the Available Network(s) option, then press the Enter button
Use the arrow button to highlight the Wi-Fi network you wish to connect to, then press the Connect button.
Â
If the Wi-Fi network is not displayed, press the Scan button to manually search for available Wi-Fi networks
You will then be prompted to enter the password for this Wi-Fi network.  Use the phone's keypad to enter the password, then press the Connect button.
(Note: Use the 2aB button to select between entering numbers, lower case letters, and upper case letters).
The Phone will connect to the selected Wi-Fi network
Verify that the phone is now connected to the Wi-Fi network by identifying the Wi-Fi icon near the top of the phone's display
To identify the IP address of Wi-Fi connection simply press the check-mark key on the phone twice
Manually Entering Wireless Network
Press the Menu button
Use the arrow buttons to highlight the Setting option, then press the Enter button
Highlight the Basic Setting option and press the Enter button
Use the arrow buttons to highlight the Wi-Fi option (near bottom of the list), then press the Enter button
By default, Wi-Fi should be set to Manual Mode. Press the Enter button
Use the down arrow button to highlight The Storage Network option, then press the Add button
Using the phone's arrow keys and keypad enter in Wi-Fi network details (Security type, SSID and password).
Once completed, press the Save button
Disable Wi-Fi
Press the Menu button
Use the arrow buttons to highlight the Setting option, then press the Enter button
Highlight the Basic Setting option and press the Enter button
Use the arrow buttons to highlight the Wi-Fi option (near bottom of the list), then press the Enter button
Press the Enter button
To disable Wi-Fi use the Switch button to toggle W-Fi Off. Then press the Save button
Â
The phone will save settings and deactivate Wi-Fi