Phones - Sangoma P Codes
Overview
Sangoma phone configs use "P Codes" or Programming Codes. Each P Code is assigned a number. The configs then use a standard XML layout, ie: <pcode>value</pcode>. Below is a list of all P Codes, the value that Endpoint Manager sets by default, and the description of the P Code including possible settings.
Sangoma Phone P Codes
P271
EPM Default Value: __line1Enable__
Description: Account Active (In Use). 0 - No, 1 - Yes
P47
EPM Default Value: __line1Dest__:__line1ServerPort__
Description: Primary SIP Server(eg:sip.mycompany.com or IP address)
P4567
EPM Default Value: 0
Description: Prefer Primary SIP Server (In Use). 0 - No, 1 - Yes
P130
EPM Default Value: __transport1__
Description: SIP Transport 0 - UDP, 1 - TCP, 2 - TLS
P52
EPM Default Value: 2
Description: NAT Traversal. 0 - No, 1 - STUN 2 - No,but send keep alive
P35
EPM Default Value: __line1Ext__
Description: SIP User ID
P36
EPM Default Value: __line1Ext__
Description: Authenticate ID
P34
EPM Default Value: __line1Pass__
Description: Authenticate password
P3
EPM Default Value: __line1Name__
Description: Name
P103
EPM Default Value: 0
Description: DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV
P63
EPM Default Value: 0
Description: User ID Is Phone Number.0 - No, 1 - Yes
P31
EPM Default Value: __line1Enable__
Description: SIP Registration. 0 - No, 1 - Yes
P81
EPM Default Value: 1
Description: Unregister On Reboot.0 - No, 1 - Yes
P32
EPM Default Value: 15
Description: Register Expiration(in minutes. default 1 hour, max 45 days)
P109
EPM Default Value: 1
Description: Outgoing Call Without Registration.0 - No, 1 - Yes
P78
EPM Default Value: 0
Description: Use Random Port.0 - No, 1 - Yes.
When set to YES (value of 1) the SIP source port the phone uses will be randomly generated rather than using 5060. This can be very useful in resolving NAT issues where many phones use the same port of 5060. Using 5060 for many phones is not an issue in itself, but this can expose issues in certain router NAT configurations. To quickly resolve these issues the phones can all just use different SIP ports. In summary, if this option is needed it's essentially a work around for a NAT/router issue.
P33
EPM Default Value: __voicemail__
Description: Voice Mail UserID(UserID for voice mail system)
P57
EPM Default Value: __line1Codec1__
Description: Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B
P58
EPM Default Value: __line1Codec2__
Description: Second Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B
P59
EPM Default Value: __line1Codec3__
Description: Third Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B
P60
EPM Default Value: __line1Codec4__
Description: Fourth Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B
P61
EPM Default Value: __line1Codec5__
Description: Fifth Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B
P62
EPM Default Value: __line1Codec6__
Description: Sixth Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B
P37
EPM Default Value: 2
Description: Voice Frames Per TX
P49
EPM Default Value: 0
Description: G723 Rate.0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate
P79
EPM Default Value: 101
Description: DTMF Payload Type
P74
EPM Default Value: 0
Description: Send Flash Event.0 - no, 1 - yes
P191
EPM Default Value: 0
Description: Enable Call Features.0 - no, 1 - yes
P197
EPM Default Value:
Description: Proxy Require
P101
EPM Default Value:
Description: Use NAT IP(use in SIP/SDP message if specified)
P183
EPM Default Value: __srtpMode1__
Description: SRTP Mode 0, Disabled, 1, Enabled but not forced, 2, Enabled and forced
P50
EPM Default Value: 0
Description: VAD.0 - no, 1 - yes
P291
EPM Default Value: 0
Description: Symmetric RTP.0 - no, 1 - yes
P133
EPM Default Value: 1
Description: Jitter Buffer Type.0 - fixed, 1 - adaptive
P132
EPM Default Value: 1
Description: Jitter Buffer Length.0 - low, 1 - medium, 2 - high
P104
EPM Default Value: __ringtone__
Description: Account Ring Tone
P185
EPM Default Value: 60
Description: Ring Timeout(10-300 seconds,default is 60 seconds)
P72
EPM Default Value: 1
Description: Use # As Dial Key.0 - no, 1 - yes
P4200
EPM Default Value: __dialpattern__
Description: Dial Plan (dial plan prefix string).
P99
EPM Default Value: 0
Description: Subscribe for MWI.0 - no,do not send SUBSCRIBE for Message Waiting Indication, 1 - yes,send periodical SUBBSCRIBE for ,Message Waiting indication
P65
EPM Default Value: 0
Description: Send Anonymous.0 - no, 1 - yes
P129
EPM Default Value: __acr__
Description: Anonymous Call Rejection.0 - no, 1 - yes
P258
EPM Default Value: 1
Description: Check SIP User ID.0 - no, 1 - yes
P90
EPM Default Value: 0
Description: Auto Answer.0 - no, 1 - yes
P298
EPM Default Value: 1
Description: Allow Auto Answer By Call-Info.0 - no, 1 - yes
P299
EPM Default Value: __remoteDisconnect__
Description: Turn off Speaker on remote disconnect.0 - no, 1 - yes
P260
EPM Default Value: 180
Description: Session Expiration(default is 180 seconds)
P261
EPM Default Value: 90
Description: Min-SE(default and minimum is 90 seconds)
P262
EPM Default Value: 0
Description: Caller Request Timer (Request for timer when making outbound calls) 0 - No, 1 - Yes
P263
EPM Default Value: 0
Description: Callee Request Timer (when caller supports timer but did not request one) 0 - No, 1 - Yes
P264
EPM Default Value: 0
Description: Force Timer (use timer even when remote party does not support) 0 - No, 1 - Yes
P266
EPM Default Value: 0
Description: UAC Specify Refresher. 1 - UAC, 2 - UAS, 0 - omit(Recommended)
P267
EPM Default Value: 1
Description: UAS Specify Refresher. 1 - UAC, 2 - UAS(When UAC did not)
P265
EPM Default Value: 0
Description: Force INVITE (Always refresh with INVITE instead of UPDATE ) 0 - No, 1 - Yes
P251
EPM Default Value: 30
Description: Hook Flash Timing
P252
EPM Default Value: 100
Description: Hook Flash Timing
P198
EPM Default Value: 100
Description: Special Feature 100 - Standard, 104 - World Call, 106 - NETHID
P134
EPM Default Value:
Description: Eventlist BLF URL
P8771
EPM Default Value: 0
Description: Share Line 0 - Disable, 1 - Broadsoft, 2 - BLA
P8791
EPM Default Value: 0
Description: SIP Server Type
P8811
EPM Default Value: 0
Description: 100 reliable retransmission
P8841
EPM Default Value: 0
Description: Early-Session 0 - Disable, 1 - Enable
P4705
EPM Default Value: __directedCallPickup__
Description: Direct Call Pickup Code
P4706
EPM Default Value:
Description: Group Call Pickup Code
P401
EPM Default Value: __line2Enable__
Description: Account Active (In Use). 0 - No, 1 - Yes
P747
EPM Default Value: __line2Dest__:__line2ServerPort__
Description: Primary SIP Server(eg:sip.mycompany.com or IP address)
P987
EPM Default Value:
Description: Failover SIP Server(Optional, used when primary server no response)
P4568
EPM Default Value: 0
Description: Prefer Primary SIP Server (In Use). 0 - No, 1 - Yes
P748
EPM Default Value:
Description: Outbound Proxy(proxy.myprovider.com, or IP address, if any)
P830
EPM Default Value: __transport2__
Description: SIP Transport 0 - UDP, 1 - TCP, 2 - TLS
P730
EPM Default Value: 2
Description: NAT Traversal. 0 - No, 1 - STUN 2 - No,but send keep alive
P735
EPM Default Value: __line2Ext__
Description: SIP User ID
P736
EPM Default Value: __line2Ext__
Description: Authenticate ID
P734
EPM Default Value: __line2Pass__
Description: Authenticate password
P703
EPM Default Value: __line2Name__
Description: Name
P702
EPM Default Value: 0
Description: DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV
P763
EPM Default Value: 0
Description: User ID Is Phone Number.0 - No, 1 - Yes
P731
EPM Default Value: __line2Enable__
Description: SIP Registration. 0 - No, 1 - Yes
P752
EPM Default Value: 1
Description: Unregister On Reboot.0 - No, 1 - Yes
P732
EPM Default Value: 15
Description: Register Expiration(in minutes. default 1 hour, max 45 days)
P813
EPM Default Value: 1
Description: Outgoing Call Without Registration.0 - No, 1 - Yes
P778
EPM Default Value: 0
Description: Use Random Port.0 - No, 1 - Yes
P426
EPM Default Value: __line2Ext__
Description: Voice Mail UserID(UserID for voice mail system)
P757
EPM Default Value: __line2Codec1__
Description: Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B
P758
EPM Default Value: __line2Codec2__
Description: Second Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B
P759
EPM Default Value: __line2Codec3__
Description: Third Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B
P760
EPM Default Value: __line2Codec4__
Description: Fourth Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B
P761
EPM Default Value: __line2Codec5__
Description: Fifth Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B
P762
EPM Default Value: __line2Codec6__
Description: Sixth Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B
P737
EPM Default Value: 2
Description: Voice Frames Per TX
P749
EPM Default Value: 0
Description: G723 Rate.0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate
P779
EPM Default Value: 101
Description: DTMF Payload Type
P774
EPM Default Value: 0
Description: Send Flash Event.0 - no, 1 - yes
P151
EPM Default Value: 0
Description: Enable Call Features.0 - no, 1 - yes
P866
EPM Default Value:
Description: Use NAT IP(use in SIP/SDP message if specified)
P443
EPM Default Value: __srtpMode2__
Description: SRTP Mode 0, Disabled, 1, Enabled but not forced, 2, Enabled and forced
P750
EPM Default Value: 0
Description: VAD.0 - no, 1 - yes
P460
EPM Default Value: 0
Description: Symmetric RTP.0 - no, 1 - yes
P831
EPM Default Value: 1
Description: Jitter Buffer Type.0 - fixed, 1 - adaptive
P832
EPM Default Value: 1
Description: Jitter Buffer Length.0 - low, 1 - medium, 2 - high
P423
EPM Default Value: __ringtone__
Description: Account Ring Tone
P816
EPM Default Value: 60
Description: Ring Timeout(10-300 seconds,default is 60 seconds)
P772
EPM Default Value: 1
Description: Use # As Dial Key.0 - no, 1 - yes
P4201
EPM Default Value: __dialpattern__
Description: Dial Plan (dial plan prefix string).
P709
EPM Default Value: 0
Description: Subscribe for MWI.0 - no,do not send SUBSCRIBE for Message Waiting Indication, 1 - yes,send periodical SUBBSCRIBE for ,Message Waiting indication
P421
EPM Default Value: 0
Description: Send Anonymous.0 - no, 1 - yes
P446
EPM Default Value: __acr__
Description: Anonymous Call Rejection.0 - no, 1 - yes
P458
EPM Default Value: 1
Description: Check SIP User ID.0 - no, 1 - yes
P425
EPM Default Value: 0
Description: Auto Answer.0 - no, 1 - yes
P438
EPM Default Value: 1
Description: Allow Auto Answer By Call-Info.0 - no, 1 - yes
P439
EPM Default Value: __remoteDisconnect__
Description: Turn off Speaker on remote disconnect.0 - no, 1 - yes
P434
EPM Default Value: 180
Description: Session Expiration(default is 180 seconds)
P427
EPM Default Value: 90
Description: Min-SE(default and minimum is 90 seconds)
P428
EPM Default Value: 0
Description: Caller Request Timer (Request for timer when making outbound calls) 0 - No, 1 - Yes
P429
EPM Default Value: 0
Description: Callee Request Timer (when caller supports timer but did not request one) 0 - No, 1 - Yes
P430
EPM Default Value: 0
Description: Force Timer (use timer even when remote party does not support) 0 - No, 1 - Yes
P432
EPM Default Value: 0
Description: UAC Specify Refresher. 1 - UAC, 2 - UAS, 0 - omit(Recommended)
P433
EPM Default Value: 1
Description: UAS Specify Refresher. 1 - UAC, 2 - UAS(When UAC did not)
P431
EPM Default Value: 0
Description: Force INVITE (Always refresh with INVITE instead of UPDATE ) 0 - No, 1 - Yes
P811
EPM Default Value: 30
Description: Hook Flash Timing
P812
EPM Default Value: 100
Description: Hook Flash Timing
P767
EPM Default Value: 100
Description: Special Feature 100 - Standard, 104 - World Call, 106 - NETHID
P444
EPM Default Value:
Description: Eventlist BLF URL
P8772
EPM Default Value: 0
Description: Share Line 0 - Disable, 1 - Broadsoft, 2 - BLA
P8792
EPM Default Value: 0
Description: SIP Server Type
P8812
EPM Default Value: 0
Description: 100 reliable retransmission
P8842
EPM Default Value: 0
Description: Early-Session 0 - Disable, 1 - Enable
P4715
EPM Default Value: __directedCallPickup__
Description: Direct Call Pickup Code
P4716
EPM Default Value:
Description: Group Call Pickup Code
P501
EPM Default Value: __line3Enable__
Description: Account Active (In Use). 0 - No, 1 - Yes
P502
EPM Default Value: __line3Dest__:__line3ServerPort__
Description: Primary SIP Server(eg:sip.mycompany.com or IP address)
P988
EPM Default Value:
Description: Failover SIP Server(Optional, used when primary server no response)
P4569
EPM Default Value: 0
Description: Prefer Primary SIP Server (In Use). 0 - No, 1 - Yes
P503
EPM Default Value:
Description: Outbound Proxy(proxy.myprovider.com, or IP address, if any)
P930
EPM Default Value: __transport3__
Description: SIP Transport 0 - UDP, 1 - TCP, 2 - TLS
P514
EPM Default Value: 2
Description: NAT Traversal. 0 - No, 1 - STUN 2 - No,but send keep alive
P504
EPM Default Value: __line3Ext__
Description: SIP User ID
P505
EPM Default Value: __line3Ext__
Description: Authenticate ID
P506
EPM Default Value: __line3Pass__
Description: Authenticate password
P507
EPM Default Value: __line3Name__
Description: Name
P508
EPM Default Value: 0
Description: DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV
P509
EPM Default Value: 0
Description: User ID Is Phone Number.0 - No, 1 - Yes
P510
EPM Default Value: __line3Enable__
Description: SIP Registration. 0 - No, 1 - Yes
P511
EPM Default Value: 1
Description: Unregister On Reboot.0 - No, 1 - Yes
P512
EPM Default Value: 15
Description: Register Expiration(in minutes. default 1 hour, max 45 days)
P913
EPM Default Value: 1
Description: Outgoing Call Without Registration.0 - No, 1 - Yes
P578
EPM Default Value: 0
Description: Use Random Port.0 - No, 1 - Yes
P526
EPM Default Value: __line3Ext__
Description: Voice Mail UserID(UserID for voice mail system)
P551
EPM Default Value: __line3Codec1__
Description: Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B
P552
EPM Default Value: __line3Codec2__
Description: Second Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B
P553
EPM Default Value: __line3Codec3__
Description: Third Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B
P554
EPM Default Value: __line3Codec4__
Description: Fourth Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B
P555
EPM Default Value: __line3Codec5__
Description: Fifth Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B
P556
EPM Default Value: __line3Codec6__
Description: Sixth Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B
P537
EPM Default Value: 2
Description: Voice Frames Per TX
P559
EPM Default Value: 0
Description: G723 Rate.0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate
P579
EPM Default Value: 101
Description: DTMF Payload Type
P1891
EPM Default Value: 0
Description: Enable Call Features.0 - no, 1 - yes
P518
EPM Default Value:
Description: Proxy Require
P566
EPM Default Value:
Description: Use NAT IP(use in SIP/SDP message if specified)
P543
EPM Default Value: __srtpMode3__
Description: SRTP Mode 0, Disabled, 1, Enabled but not forced, 2, Enabled and forced
P550
EPM Default Value: 0
Description: VAD.0 - no, 1 - yes
P591
EPM Default Value: 0
Description: Symmetric RTP.0 - no, 1 - yes
P1133
EPM Default Value: 1Description: Jitter Buffer Type.0 - fixed, 1 - adaptive
Return to Documentation Home | Sangoma Support