Phones - A20, A22 and A25 TXT Configuration 2.3.2

Version

String

If the phone is configured for auto provisioning and it successfully loads this configuration, the version string will be displayed on-screen.

WAN Mode

DHCP, STATIC, PPPOE, Defaults to DHCP

Sets the method of network access for the phone. Defaults to DHCP.

WAN IP

IPv4 Address

Shows (DHCP / PPPOE) or sets (STATIC) the IPv4 address of the phone.

WAN Subnet Mask

IPv4 net mask

Shows (DHCP / PPPOE) or sets (STATIC) the IPv4 net mask of the phone.

WAN Gateway

IPv4 network gateway

Shows (DHCP / PPPOE) or sets (STATIC) the IPv4 network gateway of the phone.

Primary DNS

IPv4 Address

Shows (DHCP / PPPOE) or sets (STATIC) the primary DNS server of the phone.

Secondary DNS

IPv4 Address

Shows (DHCP / PPPOE) or sets (STATIC) the secondary DNS server of the phone.

Enable DHCP

Boolean, Defaults to 1

Enables or disables DHCP network configuration request. Defaults to 1.

Use Vendor Class ID

Boolean, Defaults to 0

Configures the phone to send DHCP Option 61, Vendor Class Identifier. Defaults to 0.

Vendor Class ID

String, Defaults to Asterisk

Sets the Vendor Class Identifier of the phone. Defaults to Asterisk.

DHCP Auto DNS

Boolean, Defaults to 1

Configures the phone to accept DNS servers provided by DHCP. If disabled, the phone will use the DNS servers defined by the PrimaryDNS and SecondaryDNS net configuration elements. Defaults to 1.

DHCP Auto Time

Boolean, Defaults to 0

Configures the phone to set its time and SNTP server based upon receipt of DHCP Option 42. If disabled, the phone will use the NTP server as defined by the SNTPServer date configuration element and time as defined in other date configuration elements. Defaults to 0.

DHCP Option 100-101

Boolean, Defaults to 1

If disabled, the phone will not set its clock according to time as provided by DHCP Options 100 and 101. Defaults to 1.

ARP Cache Life

Integer, in minutes, Defaults to 10

Specifies the lifetime, in minutes, of a cached ARP entry. Defaults to 10.

Enable PPPoE

Boolean, Defaults to 0

Configures the phone to perform PPPoE authentication in order to retrieve its network configuration. Defaults to 0

RTP Initial Port

Integer, Defaults to 10000

Sets the starting RTP port used for calls. Defaults to 10000

RTP Port Quantity

Integer, Defaults to 200

Sets the number of RTP ports to span across before recycling. Defaults to 200.

SNTP Server

IPv4 Hostname, Address, Defaults to time.nist.gov

Sets the phone's primary SNTP server. Defaults to time.nist.gov.

Second SNTP Server

IPv4 Hostname, Address, Defaults to pool.ntp.org

Sets the phone's secondary SNTP server. Defaults to pool.ntp.org.

Enable SNTP

Boolean, Defaults to 1

If disabled, the phone will not attempt to synchronize its clock to the defined SNTP Server

Time Zone

-44, -40, -38, -36, -32, -28, -24, -30, -18, -16, -14, -12, -10, -8, -4, 0, 4, 8, 12, 14, 16, 18, 20, 22, 23, 24, 26, 28, 32, 35, 36, 38, 40, 42, 44, 46, 48, 51, 52, 54, 56, Defaults to -32

Sets the time zone for the phone as follows:

(UTC-11) Samoa, -44
(UTC-10) Hawaii-Aleutian,Alaska-Aleutia, -40
(UTC-9:30) French Polynesia, -38
(UTC-9) Alaska Time, -36
(UTC-8) Vancouver,Whitehorse,Tijuana,Mexicali,Pacific Time, -32
(UTC-7) Edmonton,Calgary,Mazatlan,Chihuahua,Mountain Time,United States-MST, -28
(UTC-6) Manitoba,Easter Islands,Mexico City,Acapulco,Central Time, -24
(UTC-5) Nassau,Montreal,Ottawa,Quebec,Havana,Eastern Time, -20
(UTC-4:30) Caracas, -18
(UTC-4) Halifax,Saint John,Santiago,Asuncion,Bermuda,Falkland Islands,Trinidad Tobago, -16
(UTC-3:30) New Foundland, -14
(UTC-3) Nuuk,Buenos Aires,no DST,DST, -12
(UTC-2:30) Newfoundland and Labrador, -10
(UTC-2) no DST, -8
(UTC-1) Azores, -1
(UTC) GMT,Greenland,Torshavn,Dublin,Lisboa,Porto,Funchal,Las Palmas,London,Morocco, 0
(UTC+1) Tirane,Vienna,Brussels,Caicos,Chad,Madrid,Zagreb,Prague,Kopenhagen,Paris,Berlin,Budapest,Rome,Luxembourg,Skopje,Amsterdam,Windhoek, 4
(UTC+2) Tallinn,Helsinki,Gaza,Athens,Tel Aviv,Amman,Riga,Beirut,Kishinev,Kaliningrad,Bucharest,Damascus,Kyiv,Odessa, 8
(UTC+3) East Africa Time,Baghdad,Moscow,Ankara, 12
(UTC+3:30) Teheran, 14
(UTC+4) Yerevan,Baku,Tbilisi,Aktau,Samara, 16
(UTC+4:30) Kabul, 18
(UTC+5) Aqtobe,Bishkek,Islamabad,Chelyabinsk, 20
(UTC+5:30) Calcutta, 22
(UTC+5:45) Katmandu, 23
(UTC+6) Astana,Almaty,Novosibirsk,Omsk, 24
(UTC+6:30) Naypyitaw, 26
(UTC+7) Krasnoyarsk,Bangkok, 28
(UTC+8) Beijing,Singapore,Perth,Irkutsk, Ulan-Ude, 32
(UTC+8:45) Eucla, 35
(UTC+9) Seoul,Tokyo,Yakutsk, Chita, 36
(UTC+9:30) Adelaide,Darwin, 38
(UTC+10) Sydney,Melbourne,Canberra,Brisbane,Hobart,Vladivostok, 40
(UTC+10:30) Lord Howe Islands, 42
(UTC+11) Noumea,Srednekolymsk Time, 44
(UTC+11:30) Norfolk Island, 46
(UTC+12) Wellington,Auckland,Kamchatka Time, 48
(UTC+12:45) Chatham Islands, 51
(UTC+13) Nukualofa, 52
(UTC+13:30) Chatham Islands, 54
(UTC+14) Kiribati, 56

Defaults to -32.

Location

Integer, 0-4, Defaults to 3

Sets the daylight savings time location for automatic setting as follows:None - 0
China (Beijing) - 1
Singapore (Singapore) - 2
Australia (Perth) - 3
Russia (Irkutsk, Ulan-Ude) - 4 Defaults to 0.

Time Zone Name

String, Defaults to UTC-8

Sets the name of the time zone in UTC format. Defaults to UTC-8.

Enable DST

Boolean, Defaults to 1

If disabled, the phone will not adjust its clock for Daylight saving time rules. Defaults to 1.

DST Fixed Type

Integer, 0-2, Defaults to 2.

If set to 0, the phone will not attempt to automatically set daylight savings times. If set to 1, the phone will attempt to automatically set daylight savings times. If set to 2, the phone utilizes manually configured logic to know when to set daylight savings time modes.

SNTP Timeout

Integer, in seconds, Defaults to 60

Sets the time period at which the phone should re-sync its clock to the configured SNTP server. Defaults to 60. WE SHOULD MAKE THIS MUCH LONGER

DST Min Offset

Integer, in minutes, Defaults to 60

Sets the number of minutes to offset when the DST rule is in effect. Defaults to 60.

DST Start Mon

Integer, 1-12, Defaults to 3

Sets the month, by calendar, beginning in January, at which the DST rule should start. Defaults to 3.

DST Start Week

-1, 1, 2, 3, 4, 5, 6, Defaults to 5

Sets the week, where -1 is the last week, at which the DST rule should start. Defaults to 5.

DST Start Wday

Integer, 0-6, Defaults to 0

Sets the week day, where Sunday is 0, at which the DST rule should start. Defaults to 0.

DST Start Hour

Integer, 0-23, Defaults to 2

Sets the hour at which the DST rule should start. Defaults to 2.

DST End Mon

Integer, 1-12, Defaults to 10

Sets the month, by calendar, beginning in January, at which the DST rule should end. Defaults to 10.

DST End Week

-1, 1, 2, 3, 4, 5, 6, Defaults to 5

Sets the week, where -1 is the last week, at which the DST rule should end. Defaults to 5.

DST End Wday

Integer, 0-6, Defaults to 0

Sets the week day, where Sunday is 0, at which the DST rule should end. Defaults to 0.

DST End Hour

Integer, 0-23, Defaults to 2

Sets the hour at which the DST rule should end. Defaults to 2.

Language

0, en, cn, tc, nl, fr, ru, it, es, jp, bg, slo, cat, eus, de, es_l, pt, cz, gl, in, ma, hu, ar, uk, Defaults to 0 (English)

Sets the phone's default language as:

Arabic - ar
Bulgarian - bg
Catalan - cat
Chinese - cn
Chinese, Traditional - tc
Czech - cz
Dutch - nl
English - 0, en
Euskera - eus
French - fr
Gallego - gl
German - de
Hungarian - hu
Indonesian - in
Italian - it
Japanese - jp
Portuguese - pt
Russian - ru 
Slovenian - slo
Spanish - es
Latin American Spanish - es_l
Malaysian - ma
Ukranian - uk 

Defaults to 0, English (en).

Push XML IP

IPv4 Hostname or address

Sets the IPv4 Hostname or address of an XML PUSH server that will transmit XML to the phone.

Enable Call History

Boolean, Defaults to 1

If disabled, the phone will not record call log entries.

Active Uri IP

String

Specifies the IP address of the remote server sending commands to the phone.

Boot Completed Url

String

Specifies the URL the phone should contact when it completes the boot process.

Reg On Url

String

Specifies the URL the phone should contact when it completes a SIP registration.

Reg Off Url

String

Specifies the URL the phone should contact when SIP registration is disabled.

Reg Failed Url

String

Specifies the URL the phone should contact when SIP registration fails.

Offhook Url

String

Specifies the URL the phone should contact when the phone is taken off-hook.

Onhook Uri

String

Specifies the URI the phone should contact when the phone is placed on-hook.

Incmoing Call Url

String

Specifies the URL the phone should contact when it receives an incoming call.

Outgoing Call Url

String

Specifies the URL the phone should contact when it makes an outgoing call.

Call Active Url

String

Specifies the URL the phone should contact when an incoming call becomes an active call.

Call Stop Url

String

Specifies the URL the phone should contact when a call is ended.

DND On Url

String

Specifies the URL the phone should contact when DND is enabled.

DND Off Url

String

Specifies the URL the phone should contact when DND is disabled.

Always FWD On Url

String

Specifies the URL the phone should contact when Call Forward Always is enabled.

Always FWD Off Url

String

Specifies the URL the phone should contact when Call Forward Always is disabled.

Busy FWD On Url

String

Specifies the URL the phone should contact when Call Forward Busy is enabled.

Busy FWD Off Url

String

Specifies the URL the phone should contact when Call Forward Busy is disabled.

No Ans FWD On Url

String

Specifies the URL the phone should contact when Call Forward No Answer is enabled.

No Ans FWD Off Url

String

Specifies the URL the phone should contact when Call Forward No Answer is disabled.

Transfer Url

String

Specifies the URL the phone should contact when it transfers a call.

B Transfer Url

String

Specifies the URL the phone should contact when it performs a blind transfer.

A Transfer Url

String

Specifies the URL the phone should contact when it performs an attended transfer.

Hold Url

String

Specifies the URL the phone should contact when it places a call on hold.

Unhold Url

String

Specifies the URL the phone should contact when it takes a call off of hold.

Mute Url

String

Specifies the URL the phone should contact when Mute is enabled.

Unmute Url

String

Specifies the URL the phone should contact when Mute is disabled.

Missed call Url

String

Specifies the URL the phone should contact when it receives a new missed call.

IP Change Url

String

Specifies the URL the phone should contact when it changes IP addresses.

Idle to Busy Url

String

Specifies the URL the phone should contact when it transitions from the idle to the busy (in-use) state.

Busy to Idle Url

String

Specifies the URL the phone should contact when it transitions from the busy (in-use) to the idle state.

ATE ID

Unused

Unused

All Pswd Encryption

Boolean, Defaults to 0

If enabled, passwords contained in exported phone configurations will be disguised. Defaults to 0.

Dial by Pound

Boolean, Defaults to 1

If disabled, the phone will not allow the use of the # key to send a call upon completion of dialing. The sent number does not include the # DTMF. Defaults to 1.

BTransfer by Pound

Boolean, Defaults to 1

If enabled, the phone will allow the use of the # key to blind transfer a call. Defaults to 1.

Onhook to BXfer

Boolean, Defaults to 0

If enabled, the phone will allow the completion of a blind transfer by a cradling of the handset. Defaults to 0.

Onhook to AXfer

Boolean, Defaults to 1

If enabled, the phone will allow the completion of an attended transfer by a cradling of the handset. Defaults to 1.

Memory Key to BXfer

Boolean, Defaults to 0

If enabled, pressing a BLF after using the transfer hard key will affect a blind transfer. Defaults to 0.

Xfer On Conf Onhook

Boolean, Defaults to 0

If enabled, going on-hook can complete a conference transfer. Defaults to 0.

Dial Fixed Length

Boolean, Defaults to 0

If enabled, the phone will immediately dial the number that has been input according to a match of Fixed Length Nums. Defaults to 0.

Fixed Length Nums

Integer, Defaults to 11

Sets a number of digits that once entered, if Dial Fixed Length is enabled, will be immediately dialed. Defaults to 11.

Dial by Timeout

Boolean, Defaults to 1

If disabled, the phone will not initiate a dial once the timeout set by Dial Timeout value is reached. Defaults to 1.

Dial Timeout value

Integer, in seconds, Defaults to 5

Sets the amount of time, in seconds, the phone will wait for additional digits before completing a dial. Defaults to 5

Dialpeer With Line

0

Defaults to 0.

Accept Any Call

Boolean, Defaults to 1

If disabled, the phone will not allow anonymous incoming calls. Defaults to 1.

IP Dial Prefix

String, Defaults to .

Sets a dialing prefix to be prepended before making IP dialed calls. Defaults to .

Auto Switch Call

Boolean, Defaults to 0

If enabled, the phone will switch and provide ringing indication for new incoming calls if a multicast call was already in progress. Defaults to 0.

Transf SDial

DTMF

If defined, and if you have a speed dial set for this digit, the phone will, in the transfer state, use the speed dial assigned for this digit to affect the transfer.

Enable Code Plan

Boolean, Defaults to 0

If enabled, the phone will automatically truncate incoming numbers using the country code as defined by Country Code, Area Code and Code Plan List. Defaults to 0.

Country Code

String

Sets the country code to be truncated from incoming numbers.

Area Code

String

Sets the area code to be truncated from incoming numbers.

Transfer DTMF Code

DTMF string

If defined, sets digits that are sent to the server when a transfer is executed, in order to affect server-side transfer logic.

Hold DTMF Code

DTMF string

If defined, sets digits that are sent to the server when a hold is executed, in order to affect server-side hold logic.

Conf DTMF Code

DTMF string

If defined, sets digits that are sent to the server when a conference is executed, in order to affect server-side conference logic.

ID

P1

Sets the port to which the config applies; always set to P1.

Enable DND

Integer, 0-2, Defaults to 0

When set to 0, enabling DND from the phone will have not affect from any line. When set to 1, enabling DND from the phone will have affect from any line. When set to 2, DND enabling/disabling will follow line rules.

DND Mode

Integer, 0-1, Defaults to 0

Sets the DND mode for the phone. If set to 0, DND mode for the phone (Enable DND) will be used. If set to 1, DND will be obeyed per-line. Defaults to 0.

Call Record Type

Integer, 0-1, Defaults to 0

Sets the method of display within the Call Log. If set to 0, displays names. If set to 1, displays numbers. Defaults to 0.

Enable Force Rin

Boolean, Defaults to 0

If enabled, the mute and volume keys can prevent the phone from ringing audibly. If disabled, the mute and volume keys can be used to mute the ringing sound. Defaults to 0.

Mute Ringing

Boolean, Defaults to 0

If enabled, the phone will not ring audibly, only visually, on incoming calls. Defaults to 0.

CWaiting Tone

Boolean, Defaults to 1

If disabled, the phone will not play a call waiting tone when an incoming call arrives while another call is in progress. Defaults to 1.

Ban Dial Out

Boolean, Defaults to 0

If enabled, the phone will not be allowed to make outgoing calls, but can still receive incoming calls. If disabled, the phone can both make and receive calls. Defaults to 0.

Ban Empty CID

Boolean, Defaults to 0

If enabled, the phone will reject any calls that arrive without Caller ID. Defaults to 0.

Enable CLIP

Boolean, Defaults to 1

If disabled, the phone will not display calling party identification on-screen for incoming calls. Defaults to 1.

CallWaiting

Boolean, Defaults to 1

If disabled, the phone will reject additional incoming calls while one is already in progress. Defaults to 1.

CallTransfer

Boolean, Defaults to 1

If disabled, the phone will not be able to transfer calls. Defaults to 1.

CallSemiXfer

Boolean, Defaults to 1

If disabled, the phone will not be able to perform blond transfers. Defaults to 1.

CallConference

Boolean, Defaults to 1

If disabled, the phone will not be able to perform conference calls. Defaults to 1.

AutoAnswer

Boolean, Defaults to 0

If enabled, and if the No Answer Time has elapsed, the phone will automatically answer an incoming call. Defaults to 0.

No Answer Time

Integer, in seconds, Defaults to 20

Sets the amount of time, in seconds, the phone should wait on an incoming call before proceeding to AutoAnswer, if AutoAnswer is enabled. Defaults to 20.

Warm Line Time

Integer, in seconds, 0-9, Defaults to 0.

Sets the amount of time the phone must remain off-hook before attempting to execute Hotline functionality.

Hotline Num

String

Sets the number to be dialed when the off-hook time is greater than the Warm Line Time and Enable Hotline is enabled.

Auto PickupNext

Boolean, Defaults to 0

If enabled, ending one call while another is ringing or in progress automatically picks up the ringing or other in-progress call. Defaults to 0.

Busy No Line

Boolean, Defaults to 0

If enabled, the phone will play dialing tone when off-hook, only if off-hook on a registered SIP line. Defaults to 0.

Auto Onhook

Boolean, Defaults to 1

If disabled, and the Auto Onhook Time has not been reached, the phone will remain off-hook after the conclusion of a handsfree call. Defaults to 1.

Auto Onhook Time

Integer, in seconds, Defaults to 3

Sets the time at which the phone should remain off-hook before going on-hook if Auto Onhook is not disabled. Defaults to 3.

DND Code

Integer, 0-3, Defaults to 1

Sets the SIP response code provided when the phone has DND enabled as follows:

404 (Not Found) - 0
480 (Temporarily Not Available) - 1
486 (Busy Here) - 2
603 (Decline) - 3 

Defaults to 1

Busy Code

Integer, 0-3, Defaults to 2

Sets the SIP response code provided when the phone is busy as follows:

404 (Not Found) - 0
480 (Temporarily Not Available) - 1
486 (Busy Here) - 2
603 (Decline) - 3 

Defaults to 2

Reject Code

Integer, 0-3, Defaults to 3

Sets the SIP response code provided when the phone rejects a call as follows:

404 (Not Found) - 0
480 (Temporarily Not Available) - 1
486 (Busy Here) - 2
603 (Decline) - 3 

Defaults to 3

Caller Name Type

Integer, 0-5, Defaults to 0

Sets the priority of the caller name presentation:

Phonebook, followed by LDAP, followed by SIP Display name - 0
Phonebook, followed by SIP Display name, followed by LDAP - 1
LDAP, followed by Phonebook, followed by SIP Display name - 2
LDAP, followed by SIP Display name, followed by Phonebook - 3
SIP Display name, followed by Phonebook, followed by LDAP - 4
SIP Display name, followed by LDAP, followed by Phonebook - 5 

Enable Intercom

Boolean, Defaults to 1

If disabled, the phone will not go into Intercom mode when receiving an INVITE that should cause it to auto-answer, e.g. Alert-Info: info=alert-autoanswer; or Call-Info: answer-after=2. Defaults to 1.

Intercom Mute

Boolean, Defaults to 0

If enabled, the phone, when it goes into Intercom mode, will automatically mute the microphone. Defaults to 0.

Intercom Tone

Boolean, Defaults to 1

If disabled, the phone will not play back a tone before it begins an Intercom call. Defaults to 1.

Intercom Barge

Boolean, Defaults to 1

If disabled, the phone will not allow an Intercom call to barge in over an already-in-progress call. Defaults to 1.

Use Auto Redial