Sangoma's D & P series Template

Smart BLF

The D & P series phones support 'Smart BLF' which allows control over LED color/blink for normal BLF behavior.

Here you can set display related settings.

This section will allow you to set volume control settings.

Backup Destination- Enable and Disable the use of backup PBX servers IP Address or FQDN and port.
Backup Destination Address- If Backup destination Enable, you can define the backup PBX servers IP Address or FQDN (Secondary host).
Backup Destination Port- If Backup destination Enable, you can define the backup PBX servers IP Address or FQDN port.
Outbound Proxy- You can define the outbound PBX servers IP Address or FQDN.
Outbound Proxy Port- You can define the outbound PBX servers IP Address or FQDN port.
Sip Keep Alive Mode- You can enable and disable the sip keep alive mode.
Sip Keep Alive Interval (Seconds)- You can define the sip keep alive interval in seconds.

With our latest update for D Phones, now you can set D phones ringtones with custom ringtones.

Adding the Custom RingTones -

Endpoint Manager → Right Navigator → Ringtone Management

Ringtone Management page will show the option to add Ringtones for Sangoma S series phones or Digium D series phones.

Click on Add Ringtone Button to add custom ringtone.
Now give Description for custom ringtones and to upload the .wav or .mp3 ringtones file you can click on Browse button or drag the ringtone to Drop Ringtone Here. Important size of custom ringtone file should be less than 1MB and 15 or less seconds in length. Once the ringtone uploaded click on play button.

The three options are available at the bottom of the Add New Ringtone page are:
- Save- This button will save the custom ringtones in PBX database and convert the .wav or .mp3 ringtone file to sln16. The custom ringtones file will be save to path /tftpboot/ringtones/formatted.
- Reset- This option will reset the Add new ringtone for unsaved custom ringtones file.
- Delete- This option will delete the custom ringtones.
These two option are use to edit and delete the custom ringtones.

We have added the Ring Tone feature in Digium template. Here you can either choose default ringtones or custom uploaded ringtones.

With our latest update for D & P Phones , User can add and modify listener & Broadcast settings.

For now only 10 listener and Broadcast can be added and deleted using

Supported Devices - P320, P325, P330, P370, D40, D45, D50, D60, D62, D65, D70, D80

Name - A name to be provided in the phone's announcement status bar when audio is received over this listener.
IP-Address - Multicast address to which phone should subscribe for audio. IP-Address range (225.0.0.0 - 239.255.255.255)
Port - Port, combined with address above, to which phone should subscribe for audio. Valid integer for ports (1-65535).
Priority - Prioritization level, lower given more priority, for playing back streams when more than one subscribed address is providing audio.
Interrupt Calls - If 1, places any in-progress calls on hold before playing back audio, and ignore the phone's local volume setting, playing back the audio at full volume. If 0, in-progress calls will have their audio played over the top of any in-progress calls. If 2, phone will ignore pages for this listener if it is involved in another call

Supported Devices - P320, P325, P330, P370, D60, D62, D65.

Name - A name to be provided in the phone's Multicast Page application or on a Rapid Dial key when mapping this broadcast.
IP-Address - Multicast address to which phone will broadcast audio. IP-Address range (225.0.0.0 - 239.255.255.255).
Port - Port, combined with address above, to which phone will broadcast audio. Valid integer for ports (1-65535).
Codec- Specifies the codec that will be used by the phone in its multicast audio broadcast.