Overview

Sangoma phone configs use "P Codes" or Programming Codes.  Each P Code is assigned a number.  The configs then use a standard XML layout, ie: <pcode>value</pcode>.  Below is a list of all P Codes, the value that Endpoint Manager sets by default, and the description of the P Code including possible settings.

Sangoma Phone P Codes

P271
EPM Default Value: __line1Enable__
Description: Account Active (In Use). 0 - No, 1 - Yes

P47
EPM Default Value: __line1Dest__:__line1ServerPort__
Description: Primary SIP Server(eg:sip.mycompany.com or IP address)

P4567
EPM Default Value: 0
Description: Prefer Primary SIP Server (In Use). 0 - No, 1 - Yes

P130
EPM Default Value: __transport1__
Description: SIP Transport 0 - UDP, 1 - TCP, 2 - TLS

P52
EPM Default Value: 2
Description: NAT Traversal. 0 - No, 1 - STUN 2 - No,but send keep alive

P35
EPM Default Value: __line1Ext__
Description: SIP User ID

P36
EPM Default Value: __line1Ext__
Description: Authenticate ID

P34
EPM Default Value: __line1Pass__
Description: Authenticate password

P3
EPM Default Value: __line1Name__
Description: Name

P103
EPM Default Value: 0
Description: DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV

P63
EPM Default Value: 0
Description: User ID Is Phone Number.0 - No, 1 - Yes

P31
EPM Default Value: __line1Enable__
Description: SIP Registration. 0 - No, 1 - Yes

P81
EPM Default Value: 1
Description: Unregister On Reboot.0 - No, 1 - Yes

P32
EPM Default Value: 15
Description: Register Expiration(in minutes. default 1 hour, max 45 days)

P109
EPM Default Value: 1
Description: Outgoing Call Without Registration.0 - No, 1 - Yes

P78
EPM Default Value: 0
Description: Use Random Port.0 - No, 1 - Yes. 
When set to YES (value of 1) the SIP source port the phone uses will be randomly generated rather than using 5060. This can be very useful in resolving NAT issues where many phones use the same port of 5060. Using 5060 for many phones is not an issue in itself, but this can expose issues in certain router NAT configurations. To quickly resolve these issues the phones can all just use different SIP ports. In summary, if this option is needed it's essentially a work around for a NAT/router issue. 

P33
EPM Default Value: __voicemail__
Description: Voice Mail UserID(UserID for voice mail system)

P57
EPM Default Value: __line1Codec1__
Description: Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B

P58
EPM Default Value: __line1Codec2__
Description: Second Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B

P59
EPM Default Value: __line1Codec3__
Description: Third Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B

P60
EPM Default Value: __line1Codec4__
Description: Fourth Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B

P61
EPM Default Value: __line1Codec5__
Description: Fifth Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B

P62
EPM Default Value: __line1Codec6__
Description: Sixth Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B

P37
EPM Default Value: 2
Description: Voice Frames Per TX

P49
EPM Default Value: 0
Description: G723 Rate.0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate

P79
EPM Default Value: 101
Description: DTMF Payload Type

P74
EPM Default Value: 0
Description: Send Flash Event.0 - no, 1 - yes

P191
EPM Default Value: 0
Description: Enable Call Features.0 - no, 1 - yes

P197
EPM Default Value:
Description: Proxy Require

P101
EPM Default Value:
Description: Use NAT IP(use in SIP/SDP message if specified)

P183
EPM Default Value: __srtpMode1__
Description: SRTP Mode 0, Disabled, 1, Enabled but not forced, 2, Enabled and forced

P50
EPM Default Value: 0
Description: VAD.0 - no, 1 - yes

P291
EPM Default Value: 0
Description: Symmetric RTP.0 - no, 1 - yes

P133
EPM Default Value: 1
Description: Jitter Buffer Type.0 - fixed, 1 - adaptive

P132
EPM Default Value: 1
Description: Jitter Buffer Length.0 - low, 1 - medium, 2 - high

P104
EPM Default Value: __ringtone__
Description: Account Ring Tone

P185
EPM Default Value: 60
Description: Ring Timeout(10-300 seconds,default is 60 seconds)

P72
EPM Default Value: 1
Description: Use # As Dial Key.0 - no, 1 - yes

P4200
EPM Default Value: __dialpattern__
Description: Dial Plan (dial plan prefix string).

P99
EPM Default Value: 0
Description: Subscribe for MWI.0 - no,do not send SUBSCRIBE for Message Waiting Indication, 1 - yes,send periodical SUBBSCRIBE for ,Message Waiting indication

P65
EPM Default Value: 0
Description: Send Anonymous.0 - no, 1 - yes

P129
EPM Default Value: __acr__
Description: Anonymous Call Rejection.0 - no, 1 - yes

P258
EPM Default Value: 1
Description: Check SIP User ID.0 - no, 1 - yes

P90
EPM Default Value: 0
Description: Auto Answer.0 - no, 1 - yes

P298
EPM Default Value: 1
Description: Allow Auto Answer By Call-Info.0 - no, 1 - yes

P299
EPM Default Value: __remoteDisconnect__
Description: Turn off Speaker on remote disconnect.0 - no, 1 - yes

P260
EPM Default Value: 180
Description: Session Expiration(default is 180 seconds)

P261
EPM Default Value: 90
Description: Min-SE(default and minimum is 90 seconds)

P262
EPM Default Value: 0
Description: Caller Request Timer (Request for timer when making outbound calls) 0 - No, 1 - Yes

P263
EPM Default Value: 0
Description: Callee Request Timer (when caller supports timer but did not request one) 0 - No, 1 - Yes

P264
EPM Default Value: 0
Description: Force Timer (use timer even when remote party does not support) 0 - No, 1 - Yes

P266
EPM Default Value: 0
Description: UAC Specify Refresher. 1 - UAC, 2 - UAS, 0 - omit(Recommended)

P267
EPM Default Value: 1
Description: UAS Specify Refresher. 1 - UAC, 2 - UAS(When UAC did not)

P265
EPM Default Value: 0
Description: Force INVITE (Always refresh with INVITE instead of UPDATE ) 0 - No, 1 - Yes

P251
EPM Default Value: 30
Description: Hook Flash Timing

P252
EPM Default Value: 100
Description: Hook Flash Timing

P198
EPM Default Value: 100
Description: Special Feature 100 - Standard, 104 - World Call, 106 - NETHID

P134
EPM Default Value:
Description: Eventlist BLF URL

P8771
EPM Default Value: 0
Description: Share Line 0 - Disable, 1 - Broadsoft, 2 - BLA

P8791
EPM Default Value: 0
Description: SIP Server Type

P8811
EPM Default Value: 0
Description: 100 reliable retransmission

P8841
EPM Default Value: 0
Description: Early-Session 0 - Disable, 1 - Enable

P4705
EPM Default Value: __directedCallPickup__
Description: Direct Call Pickup Code

P4706
EPM Default Value:
Description: Group Call Pickup Code

P401
EPM Default Value: __line2Enable__
Description: Account Active (In Use). 0 - No, 1 - Yes

P747
EPM Default Value: __line2Dest__:__line2ServerPort__
Description: Primary SIP Server(eg:sip.mycompany.com or IP address)

P987
EPM Default Value:
Description: Failover SIP Server(Optional, used when primary server no response)

P4568
EPM Default Value: 0
Description: Prefer Primary SIP Server (In Use). 0 - No, 1 - Yes

P748
EPM Default Value:
Description: Outbound Proxy(proxy.myprovider.com, or IP address, if any)

P830
EPM Default Value: __transport2__
Description: SIP Transport 0 - UDP, 1 - TCP, 2 - TLS

P730
EPM Default Value: 2
Description: NAT Traversal. 0 - No, 1 - STUN 2 - No,but send keep alive

P735
EPM Default Value: __line2Ext__
Description: SIP User ID

P736
EPM Default Value: __line2Ext__
Description: Authenticate ID

P734
EPM Default Value: __line2Pass__
Description: Authenticate password

P703
EPM Default Value: __line2Name__
Description: Name

P702
EPM Default Value: 0
Description: DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV

P763
EPM Default Value: 0
Description: User ID Is Phone Number.0 - No, 1 - Yes

P731
EPM Default Value: __line2Enable__
Description: SIP Registration. 0 - No, 1 - Yes

P752
EPM Default Value: 1
Description: Unregister On Reboot.0 - No, 1 - Yes

P732
EPM Default Value: 15
Description: Register Expiration(in minutes. default 1 hour, max 45 days)

P813
EPM Default Value: 1
Description: Outgoing Call Without Registration.0 - No, 1 - Yes

P778
EPM Default Value: 0
Description: Use Random Port.0 - No, 1 - Yes

P426
EPM Default Value: __line2Ext__
Description: Voice Mail UserID(UserID for voice mail system)

P757
EPM Default Value: __line2Codec1__
Description: Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B

P758
EPM Default Value: __line2Codec2__
Description: Second Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B

P759
EPM Default Value: __line2Codec3__
Description: Third Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B

P760
EPM Default Value: __line2Codec4__
Description: Fourth Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B

P761
EPM Default Value: __line2Codec5__
Description: Fifth Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B

P762
EPM Default Value: __line2Codec6__
Description: Sixth Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B

P737
EPM Default Value: 2
Description: Voice Frames Per TX

P749
EPM Default Value: 0
Description: G723 Rate.0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate

P779
EPM Default Value: 101
Description: DTMF Payload Type

P774
EPM Default Value: 0
Description: Send Flash Event.0 - no, 1 - yes

P151
EPM Default Value: 0
Description: Enable Call Features.0 - no, 1 - yes

P866
EPM Default Value:
Description: Use NAT IP(use in SIP/SDP message if specified)

P443
EPM Default Value: __srtpMode2__
Description: SRTP Mode 0, Disabled, 1, Enabled but not forced, 2, Enabled and forced

P750
EPM Default Value: 0
Description: VAD.0 - no, 1 - yes

P460
EPM Default Value: 0
Description: Symmetric RTP.0 - no, 1 - yes

P831
EPM Default Value: 1
Description: Jitter Buffer Type.0 - fixed, 1 - adaptive

P832
EPM Default Value: 1
Description: Jitter Buffer Length.0 - low, 1 - medium, 2 - high

P423
EPM Default Value: __ringtone__
Description: Account Ring Tone

P816
EPM Default Value: 60
Description: Ring Timeout(10-300 seconds,default is 60 seconds)

P772
EPM Default Value: 1
Description: Use # As Dial Key.0 - no, 1 - yes

P4201
EPM Default Value: __dialpattern__
Description: Dial Plan (dial plan prefix string).

P709
EPM Default Value: 0
Description: Subscribe for MWI.0 - no,do not send SUBSCRIBE for Message Waiting Indication, 1 - yes,send periodical SUBBSCRIBE for ,Message Waiting indication

P421
EPM Default Value: 0
Description: Send Anonymous.0 - no, 1 - yes

P446
EPM Default Value: __acr__
Description: Anonymous Call Rejection.0 - no, 1 - yes

P458
EPM Default Value: 1
Description: Check SIP User ID.0 - no, 1 - yes

P425
EPM Default Value: 0
Description: Auto Answer.0 - no, 1 - yes

P438
EPM Default Value: 1
Description: Allow Auto Answer By Call-Info.0 - no, 1 - yes

P439
EPM Default Value: __remoteDisconnect__
Description: Turn off Speaker on remote disconnect.0 - no, 1 - yes

P434
EPM Default Value: 180
Description: Session Expiration(default is 180 seconds)

P427
EPM Default Value: 90
Description: Min-SE(default and minimum is 90 seconds)

P428
EPM Default Value: 0
Description: Caller Request Timer (Request for timer when making outbound calls) 0 - No, 1 - Yes

P429
EPM Default Value: 0
Description: Callee Request Timer (when caller supports timer but did not request one) 0 - No, 1 - Yes

P430
EPM Default Value: 0
Description: Force Timer (use timer even when remote party does not support) 0 - No, 1 - Yes

P432
EPM Default Value: 0
Description: UAC Specify Refresher. 1 - UAC, 2 - UAS, 0 - omit(Recommended)

P433
EPM Default Value: 1
Description: UAS Specify Refresher. 1 - UAC, 2 - UAS(When UAC did not)

P431
EPM Default Value: 0
Description: Force INVITE (Always refresh with INVITE instead of UPDATE ) 0 - No, 1 - Yes

P811
EPM Default Value: 30
Description: Hook Flash Timing

P812
EPM Default Value: 100
Description: Hook Flash Timing

P767
EPM Default Value: 100
Description: Special Feature 100 - Standard, 104 - World Call, 106 - NETHID

P444
EPM Default Value:
Description: Eventlist BLF URL

P8772
EPM Default Value: 0
Description: Share Line 0 - Disable, 1 - Broadsoft, 2 - BLA

P8792
EPM Default Value: 0
Description: SIP Server Type

P8812
EPM Default Value: 0
Description: 100 reliable retransmission

P8842
EPM Default Value: 0
Description: Early-Session 0 - Disable, 1 - Enable

P4715
EPM Default Value: __directedCallPickup__
Description: Direct Call Pickup Code

P4716
EPM Default Value:
Description: Group Call Pickup Code

P501
EPM Default Value: __line3Enable__
Description: Account Active (In Use). 0 - No, 1 - Yes

P502
EPM Default Value: __line3Dest__:__line3ServerPort__
Description: Primary SIP Server(eg:sip.mycompany.com or IP address)

P988
EPM Default Value:
Description: Failover SIP Server(Optional, used when primary server no response)

P4569
EPM Default Value: 0
Description: Prefer Primary SIP Server (In Use). 0 - No, 1 - Yes

P503
EPM Default Value:
Description: Outbound Proxy(proxy.myprovider.com, or IP address, if any)

P930
EPM Default Value: __transport3__
Description: SIP Transport 0 - UDP, 1 - TCP, 2 - TLS

P514
EPM Default Value: 2
Description: NAT Traversal. 0 - No, 1 - STUN 2 - No,but send keep alive

P504
EPM Default Value: __line3Ext__
Description: SIP User ID

P505
EPM Default Value: __line3Ext__
Description: Authenticate ID

P506
EPM Default Value: __line3Pass__
Description: Authenticate password

P507
EPM Default Value: __line3Name__
Description: Name

P508
EPM Default Value: 0
Description: DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV

P509
EPM Default Value: 0
Description: User ID Is Phone Number.0 - No, 1 - Yes

P510
EPM Default Value: __line3Enable__
Description: SIP Registration. 0 - No, 1 - Yes

P511
EPM Default Value: 1
Description: Unregister On Reboot.0 - No, 1 - Yes

P512
EPM Default Value: 15
Description: Register Expiration(in minutes. default 1 hour, max 45 days)

P913
EPM Default Value: 1
Description: Outgoing Call Without Registration.0 - No, 1 - Yes

P578
EPM Default Value: 0
Description: Use Random Port.0 - No, 1 - Yes

P526
EPM Default Value: __line3Ext__
Description: Voice Mail UserID(UserID for voice mail system)

P551
EPM Default Value: __line3Codec1__
Description: Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B

P552
EPM Default Value: __line3Codec2__
Description: Second Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B

P553
EPM Default Value: __line3Codec3__
Description: Third Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B

P554
EPM Default Value: __line3Codec4__
Description: Fourth Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B

P555
EPM Default Value: __line3Codec5__
Description: Fifth Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B

P556
EPM Default Value: __line3Codec6__
Description: Sixth Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B

P537
EPM Default Value: 2
Description: Voice Frames Per TX

P559
EPM Default Value: 0
Description: G723 Rate.0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate

P579
EPM Default Value: 101
Description: DTMF Payload Type

P1891
EPM Default Value: 0
Description: Enable Call Features.0 - no, 1 - yes

P518
EPM Default Value:
Description: Proxy Require

P566
EPM Default Value:
Description: Use NAT IP(use in SIP/SDP message if specified)

P543
EPM Default Value: __srtpMode3__
Description: SRTP Mode 0, Disabled, 1, Enabled but not forced, 2, Enabled and forced

P550
EPM Default Value: 0
Description: VAD.0 - no, 1 - yes

P591
EPM Default Value: 0
Description: Symmetric RTP.0 - no, 1 - yes

P1133
EPM Default Value: 1
Description: Jitter Buffer Type.0 - fixed, 1 - adaptive

P1132
EPM Default Value: 1
Description: Jitter Buffer Length.0 - low, 1 - medium, 2 - high

P523
EPM Default Value: __ringtone__
Description: Account Ring Tone

P1885
EPM Default Value: 60
Description: Ring Timeout(10-300 seconds,default is 60 seconds)

P1672
EPM Default Value: 1
Description: Use # As Dial Key.0 - no, 1 - yes

P4202
EPM Default Value: __dialpattern__
Description: Dial Plan (dial plan prefix string).

P515
EPM Default Value: 0
Description: Subscribe for MWI.0 - no,do not send SUBSCRIBE for Message Waiting Indication, 1 - yes,send periodical SUBBSCRIBE for ,Message Waiting indication

P521
EPM Default Value: 0
Description: Send Anonymous.0 - no, 1 - yes

P1846
EPM Default Value: __acr__
Description: Anonymous Call Rejection.0 - no, 1 - yes

P567
EPM Default Value: 1
Description: Check SIP User ID.0 - no, 1 - yes

P525
EPM Default Value: 0
Description: Auto Answer.0 - no, 1 - yes

P538
EPM Default Value: 1
Description: Allow Auto Answer By Call-Info.0 - no, 1 - yes

P539
EPM Default Value: __remoteDisconnect__
Description: Turn off Speaker on remote disconnect.0 - no, 1 - yes

P534
EPM Default Value: 180
Description: Session Expiration(default is 180 seconds)

P527
EPM Default Value: 90
Description: Min-SE(default and minimum is 90 seconds)

P528
EPM Default Value: 0
Description: Caller Request Timer (Request for timer when making outbound calls) 0 - No, 1 - Yes

P529
EPM Default Value: 0
Description: Callee Request Timer (when caller supports timer but did not request one) 0 - No, 1 - Yes

P530
EPM Default Value: 0
Description: Force Timer (use timer even when remote party does not support) 0 - No, 1 - Yes

P532
EPM Default Value: 0
Description: UAC Specify Refresher. 1 - UAC, 2 - UAS, 0 - omit(Recommended)

P533
EPM Default Value: 1
Description: UAS Specify Refresher. 1 - UAC, 2 - UAS(When UAC did not)

P531
EPM Default Value: 0
Description: Force INVITE (Always refresh with INVITE instead of UPDATE ) 0 - No, 1 - Yes

P1811
EPM Default Value: 30
Description: Hook Flash Timing

P1812
EPM Default Value: 100
Description: Hook Flash Timing

P524
EPM Default Value: 100
Description: Special Feature 100 - Standard, 104 - World Call, 106 - NETHID

P544
EPM Default Value:
Description: Eventlist BLF URL

P8773
EPM Default Value: 0
Description: Share Line 0 - Disable, 1 - Broadsoft, 2 - BLA

P8793
EPM Default Value: 0
Description: SIP Server Type

P8813
EPM Default Value: 0
Description: 100 reliable retransmission

P8843
EPM Default Value: 0
Description: Early-Session 0 - Disable, 1 - Enable

P4725
EPM Default Value: __directedCallPickup__
Description: Direct Call Pickup Code

P4726
EPM Default Value:
Description: Group Call Pickup Code

P601
EPM Default Value: __line4Enable__
Description: Account Active (In Use). 0 - No, 1 - Yes

P602
EPM Default Value: __line4Dest__:__line4ServerPort__
Description: Primary SIP Server(eg:sip.mycompany.com or IP address)

P989
EPM Default Value:
Description: Failover SIP Server(Optional, used when primary server no response)

P4570
EPM Default Value: 0
Description: Prefer Primary SIP Server (In Use). 0 - No, 1 - Yes

P603
EPM Default Value:
Description: Outbound Proxy(proxy.myprovider.com, or IP address, if any)

P1030
EPM Default Value: __transport4__
Description: SIP Transport 0 - UDP, 1 - TCP, 2 - TLS

P614
EPM Default Value: 2
Description: NAT Traversal. 0 - No, 1 - STUN 2 - No,but send keep alive

P604
EPM Default Value: __line4Ext__
Description: SIP User ID

P605
EPM Default Value: __line4Ext__
Description: Authenticate ID

P606
EPM Default Value: __line4Pass__
Description: Authenticate password

P607
EPM Default Value: __line4Name__
Description: Name

P608
EPM Default Value: 0
Description: DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV

P609
EPM Default Value: 0
Description: User ID Is Phone Number.0 - No, 1 - Yes

P610
EPM Default Value: __line4Enable__
Description: SIP Registration. 0 - No, 1 - Yes

P611
EPM Default Value: 1
Description: Unregister On Reboot.0 - No, 1 - Yes

P612
EPM Default Value: 15
Description: Register Expiration(in minutes. default 1 hour, max 45 days)

P1013
EPM Default Value: 1
Description: Outgoing Call Without Registration.0 - No, 1 - Yes

P678
EPM Default Value: 0
Description: Use Random Port.0 - No, 1 - Yes

P626
EPM Default Value: __line4Ext__
Description: Voice Mail UserID(UserID for voice mail system)

P651
EPM Default Value: __line4Codec1__
Description: Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B

P652
EPM Default Value: __line4Codec2__
Description: Second Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B

P653
EPM Default Value: __line4Codec3__
Description: Third Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B

P654
EPM Default Value: __line4Codec4__
Description: Fourth Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B

P655
EPM Default Value: __line4Codec5__
Description: Fifth Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B

P656
EPM Default Value: __line4Codec6__
Description: Sixth Preferred Vocoder In listed order 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B

P637
EPM Default Value: 2
Description: Voice Frames Per TX

P659
EPM Default Value: 0
Description: G723 Rate.0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate

P679
EPM Default Value: 101
Description: DTMF Payload Type

P1991
EPM Default Value: 0
Description: Enable Call Features.0 - no, 1 - yes

P618
EPM Default Value:
Description: Proxy Require

P666
EPM Default Value:
Description: Use NAT IP(use in SIP/SDP message if specified)

P643
EPM Default Value: __srtpMode4__
Description: SRTP Mode 0, Disabled, 1, Enabled but not forced, 2, Enabled and forced

P695
EPM Default Value: 0
Description: VAD.0 - no, 1 - yes

P691
EPM Default Value: 0
Description: Symmetric RTP.0 - no, 1 - yes

P1233
EPM Default Value: 1
Description: Jitter Buffer Type.0 - fixed, 1 - adaptive

P1232
EPM Default Value: 1
Description: Jitter Buffer Length.0 - low, 1 - medium, 2 - high

P623
EPM Default Value: __ringtone__
Description: Account Ring Tone

P1886
EPM Default Value: 60
Description: Ring Timeout(10-300 seconds,default is 60 seconds)

P1772
EPM Default Value: 1
Description: Use # As Dial Key.0 - no, 1 - yes

P42033
EPM Default Value: __dialpattern__
Description: Dial Plan (dial plan prefix string).

P615
EPM Default Value: 0
Description: Subscribe for MWI.0 - no,do not send SUBSCRIBE for Message Waiting Indication, 1 - yes,send periodical SUBBSCRIBE for ,Message Waiting indication

P621
EPM Default Value: 0
Description: Send Anonymous.0 - no, 1 - yes

P1946
EPM Default Value: __acr__
Description: Anonymous Call Rejection.0 - no, 1 - yes

P667
EPM Default Value: 1
Description: Check SIP User ID.0 - no, 1 - yes

P625
EPM Default Value: 0
Description: Auto Answer.0 - no, 1 - yes

P638
EPM Default Value: 1
Description: Allow Auto Answer By Call-Info.0 - no, 1 - yes

P639
EPM Default Value: __remoteDisconnect__
Description: Turn off Speaker on remote disconnect.0 - no, 1 - yes

P634
EPM Default Value: 180
Description: Session Expiration(default is 180 seconds)

P627
EPM Default Value: 90
Description: Min-SE(default and minimum is 90 seconds)

P628
EPM Default Value: 0
Description: Caller Request Timer (Request for timer when making outbound calls) 0 - No, 1 - Yes

P629
EPM Default Value: 0
Description: Callee Request Timer (when caller supports timer but did not request one) 0 - No, 1 - Yes

P630
EPM Default Value: 0
Description: Force Timer (use timer even when remote party does not support) 0 - No, 1 - Yes

P632
EPM Default Value: 0
Description: UAC Specify Refresher. 1 - UAC, 2 - UAS, 0 - omit(Recommended)

P633
EPM Default Value: 1
Description: UAS Specify Refresher. 1 - UAC, 2 - UAS(When UAC did not)

P631
EPM Default Value: 0
Description: Force INVITE (Always refresh with INVITE instead of UPDATE ) 0 - No, 1 - Yes

P1911
EPM Default Value: 30
Description: Hook Flash Timing

P1912
EPM Default Value: 100
Description: Hook Flash Timing

P624
EPM Default Value: 100
Description: Special Feature 100 - Standard, 104 - World Call, 106 - NETHID

P644
EPM Default Value:
Description: Eventlist BLF URL

P8774
EPM Default Value: 0
Description: Share Line 0 - Disable, 1 - Broadsoft, 2 - BLA

P8794
EPM Default Value: 0
Description: SIP Server Type

P8814
EPM Default Value: 0
Description: 100 reliable retransmission

P8844
EPM Default Value: 0
Description: Early-Session 0 - Disable, 1 - Enable

P4735
EPM Default Value: __directedCallPickup__
Description: Direct Call Pickup Code

P4736
EPM Default Value:
Description: Group Call Pickup Code

P8
EPM Default Value: 0
Description: WAN. 0 - DHCP, 1 - Static IP Address, 2 - PPPoE

P146
EPM Default Value:
Description: DHCP HostName, DHCP option 12. Max length allowed is 64 characters. Default value is 0.

P147
EPM Default Value:
Description: DHCP Domain

P148
EPM Default Value:
Description: DHCP Vendor Class ID, DHCP option 60. Max length allowed is 64 characters.
Phone Default Value: udhcp 1.12.1

P149
EPM Default Value:
Description: DHCP User Class

P9
EPM Default Value: 0
Description: IP Address 1'st octet

P10
EPM Default Value: 0
Description: IP Address 2'nd octet

P11
EPM Default Value: 0
Description: IP Address 3'rd octet

P12
EPM Default Value: 0
Description: IP Address 4'th octet

P13
EPM Default Value: 0
Description: Subnet Mask 1'st octet

P14

EPM Default Value: 0
Description: Subnet Mask 2'nd octet

P15
EPM Default Value: 0
Description: Subnet Mask 3'rd octet

P16
EPM Default Value: 0
Description: Subnet Mask 4'th octet

P17
EPM Default Value: 0
Description: Default Gateway 1'st octet

P18
EPM Default Value: 0
Description: Default Gateway 2'nd octet

P19
EPM Default Value: 0
Description: Default Gateway 3'rd octet

P20
EPM Default Value: 0
Description: Default Gateway 4'th octet

P21
EPM Default Value: 8
Description: Primary DNS 1'st octet

P22
EPM Default Value: 8
Description: Primary DNS 2'nd octet

P23
EPM Default Value: 8
Description: Primary DNS 3'rd octet

P24
EPM Default Value: 8
Description: Primary DNS 4'th octet

P25
EPM Default Value: 8
Description: Secondary DNS 1'st octet

P26
EPM Default Value: 8
Description: Secondary DNS 2'nd octet

P27
EPM Default Value: 4
Description: Secondary DNS 3'rd octet

P28
EPM Default Value: 4
Description: Secondary DNS 4'th octet

P82
EPM Default Value:
Description: PPPoE account ID

P83
EPM Default Value:
Description: PPPoE password

P269
EPM Default Value:
Description: PPPoE Service Name

P92
EPM Default Value: 8
Description: DNS Server 1'st octet

P93
EPM Default Value: 8
Description: DNS Server 2'nd octet

P94
EPM Default Value: 8
Description: DNS Server 3'rd octet

P95
EPM Default Value: 8
Description: DNS Server 4'th octet

P189
EPM Default Value: 1
Description: Reply To ICMP

P190
EPM Default Value: 1
Description: Http Access 0 - no, 1 - yes

P231
EPM Default Value: __pc_port__
Description: PC Port 1 - As Bridge, 0 - as Router, 2 - as Expansion module

P111
EPM Default Value: 192.168.66.1
Description: IP Address

P110
EPM Default Value: 255.255.255.0
Description: Subnet Mask

P112
EPM Default Value: 24
Description: IP Lease Time

P5438
EPM Default Value: __lldp__
Description: LLDP Active 0 - Disable, 1 - Enable

P5439
EPM Default Value: __lldpPacket__
Description: Packed Interval

P38
EPM Default Value: 48
Description: Layer 3 QoS (Diff-Serv or Precedence value)

P51
EPM Default Value: __vVlan__
Description: Layer 2 QoS. 802.1Q/VLAN Tag (VLAN classification for RTP)

P87
EPM Default Value: __vVlanP__
Description: Layer 2 QoS. 802.1p priority value (0 - 7).

P229
EPM Default Value: __dVlan__
Description: Data VLAN Tag (vaild only when Bridge mode)

P30
EPM Default Value: __timeserver1__
Description: NTP Server

P144
EPM Default Value: 0
Description: Allow DHCP Option 42 To Override NTP Server 0 - no, 1 - yes

P8629
EPM Default Value: __vpnEnable__
Description: VPN Active 0 - no, 1 - yes

P901
EPM Default Value: 80
Description: Web Server HTTP Port

P8724
EPM Default Value: 443
Description: Web Server HTTPS Port

P8725
EPM Default Value: 1
Description: Web Server Type 0 - Disable, 1 - HTTP&HTTPS, 2 - HTTP Only, 3 - HTTPS Only

P8626
EPM Default Value: __vlanMode__
Description: 802.1X Mode 0 - Disable, 1 - EAP-MD5

P8627
EPM Default Value: __vlanIdentity__
Description: Identity

P8628
EPM Default Value: __vlanPass__
Description: MD5 Password

P76
EPM Default Value:
Description: STUN Server (url or ip:port)

P84
EPM Default Value: 20
Description: Keep-ative Interval(seconds default:20)

P2525
EPM Default Value: __language__
Description: Web Language 0 - English, 1 - Chinese

P64
EPM Default Value: __timezone__
Description: Time Zone

P143
EPM Default Value: 0
Description: DHCP Time 0 - no, 1 - yes

P75
EPM Default Value: __daylight__
Description: Daylight Saving Time 0 - no, 1 - yes

P102
EPM Default Value: __dateFormat__
Description: Date Display Format 0 - Year - Month - Day, 1 - Month - Day - Year, 2 - Day - Month - Year

P8624
EPM Default Value: __timeFormat__
Description: Time Format, 1-12 Hour,0-24 Hour

P88
EPM Default Value: 0
Description: Lock Keypad Update 0 - no, 1 - yes

P1300
EPM Default Value: __keypressTone__
Description: Keypad DTMF Tone 1 - no, 0 - yes

P249
EPM Default Value: 0
Description: MIC Volume Amplification 0 - 0dB default, 1 - +6dB, 2 - +4dB, 3 - +2dB, 4 - -2dB, 5 - -4dB, 6 - -6dB

P8940
EPM Default Value: __screensavertimeout__
Description: Screen Time Out 0 - Off, 1 - 1min, 2 - 2min, 3 - 5min, 4 - 10min, 5 - 30min

P8950
EPM Default Value: __screensaver__
Description: ScreenSaver Type 0 - backlight off, 0 - time & logo, 2 - photo switch

P8721
EPM Default Value: __ringtone__
Description: Ring Tones

P85
EPM Default Value: __entryTimeout__
Description: NO Key Entry Timeout(in seconds, 0 means never timeout, default is 0 seconds)

P3734
EPM Default Value: __powerStatusEnable__
Description: LED Status.Power Status.0 - no, 1 - yes

P3735
EPM Default Value: __ringingStatusEnable__
Description: LED Status.Ringing Status.0 - no, 1 - yes

P3736
EPM Default Value: __misscallsStatusEnable__
Description: LED Status. MissCalls Status.0 - no, 1 - yes

P53100
EPM Default Value: 0
Description: Forward--always 1 - on, 0 - off

P53101EPM Default Value: Description: Target(Target number for transfer)