Introduction

The BRI power supply (SPEC-BNPWR1) is a power supply unit that is used to power BRI phones or other BRI devices connected to our BRI card. This is only for the BRI card in NT mode with TE devices connected to it. When the Sangoma card is in TE mode this device should not be used. 

The power supply unit is powered with a molex connector (from internal/external PSU), the output of the unit will be a connector that will plug into the green connector on the Sangoma card. See image below for the location and picture of the green connector. 

Open

To order the power supply unit simply contact sales@sangoma.com requesting part "SPEC-BNPWR1". 

More Info

Output Voltage: 36V
Output Current: 1A

Input Voltage: 12V DC, can be fed by an external or PC power supply.

Connector Polarity

Open

NOTE: If you have a power supply with the above output voltage and current, you can simply use the connector at http://www.digikey.ca/product-search/en?x=0&y=0&lang=en&site=ca&KeyWords=WM7732-nd. This will allow your power supply to connect with the green connector on the Sangoma BRI card.