USBfxo Installation

Owned by Nathaniel Halbrooks
Last updated: Feb 07, 2024 by Kelli Higdon
1 min read

 

USBFXO Analog 

View Datasheet  
 

 

 

Overview

  • Dual FXO ports

  • Easy installation, no need to open up computer to installPCI/PCIe card

  • Supports up to 2 simultaneous calls

  • Compact plastic enclosure

  • Low power consumption, takes power from USB bus

  • USB 2.0 compliant (compatible with USB 1.1)

 

The USB FXO drivers are only guaranteed to work on Centos Installations.Due to rapidly changing kernel USB core we have to limit the USB FXO drivers to Centos installations only. 
If you are trying to use the USB FXO on anything else than Centos and you have issues we might not be able to help you.

DAHDI 2.6 Currently not supported, please use DAHDI 2.5.0.2 or below

For maximum reliablity, the USB FXO should not be used through a USB Hub. While some hubs and configurations work successfully, we cannot guarantee the device will function properly through hub devices on all systems. If you are encountering issues with using this device through a USB hub, please try connecting it directly to the system USB bus

 

Hardware Installation

 

Compatibility Note 

USB 2.0 and USB 1.1 compliant
Industry standard USB type B connector
Low power consumption 200 mA: power drawn from USB bus

 

Hardware Configuration

Plug in the USB Cable into the USBFXO and the other end into the usb port on your computer.

 

Software Installation

Select your Installation type:

Return to Documentation Home I Return to Sangoma Support