Effective September 30, 2026, these products will reach End of Sale and therefore will no longer be available for purchase. Effective September 2028, these products will reach End of Life. After this date, regular updates, maintenance, and technical support will be discontinued in accordance with our product lifecycle policy. For a complete list of the affected SKUs, click HERE. |
|---|
Dialogic IMG - IMG 1010 - Telnet Client
Table of Contents
Accessing this Pane:
Dialogic IMG EMS-> Logical IMG-> Physical IMG-> Telnet Client
Description:
Use this pane to enable/disable access a Telnet Client or to verify the telnet status.
Related Topics:
IMG 1010 - Overview of Troubleshooting
Maximum Objects:
1 per Physical IMG
Technical Notes:
When configuring a Telnet Client, the following happens:
The client information is sent to this particular “Physical IMG”, also every server that the client is configured to use will also be configured on this particular “Physical IMG”. Once the client and the servers have been configured the client will continuously try connect to the servers it has been configured for.
ClientView Pane:
Field Descriptions:
Telnet Client
This field sets the Telnet Client to Enable or Disable.
Enable- You will be allowed to telnet into the IMG.
Disable- You will not be allowed to telnet into the IMG. A 'Connection refused' message will be displayed when trying to connect.
Monitoring Fields:
Telnet Connection Status
Status of telnet client is displayed here. (Connected or Disconnected)
Remote IP Address
Displays the IP address of the client that is connected to IMG.