/
Phones - Plantronics Headset Installation

Phones - Plantronics Headset Installation

Table of Contents

Overview

EHS30 Included Contents

  • EHS30

  • 3.5MM DC Jack

  • RJ12 Cord

  • RJ45 Cord

EHS30 Ports

  1. RJ-12 Port for IP Phone EXT/EHS or Expansion Module

  2. Operation LED

  3. 3.5mm DC Power Jack

  4. RJ-45 Jack

Headset Base and Phone Ports

Plantronics CS5XX series

 

Plantronics W7XX series
Back of Sangoma s700 Phone

 

CS5XX Series Installation with EHS30

The following figure shows the connections between the EHS30 Adapter, the bottom of the Sangoma Phone, and the Plantronics Wireless Headset base unit. See the detailed instructions below.

 

  1. Connect the Plantronics wireless headset base unit to the RJ-9 headset port on the IP phone, using the telephone interface cable provided by Plantronics.

    Plantronics Telephone Interface Cable
    Telephone Interface Cable Port on CS5XX Headset Base
    Headset Port on Sangoma s700 Phone

  2. Connect the included RJ-12 cord between the EHS30 Adapter RJ12 Port (Port 1) and the EXT/EHS Port of the Sangoma phone.

    RJ12 Port on EHS30
    EXT/EHS Port on Sangoma s700 Phone

  3. Connect the included 3.5mm DC Power Port (Port 3) of the EHS30 Adapter to the handset lifter/EHS cable port on the Plantronics wireless headset base unit.

    DC Power Port on EHS30 Adapter
    Handset Lifter/EHS Cable Port on CS5XX Headset Base

  4. Connect the headset base station's power cable between the DC port on the base station and a power outlet.

    DC Power Port on CS5XX Headset Base

W7XX Series Installation with EHS30

The following figure shows the connections between the EHS30 Adapter, the bottom of the Sangoma Phone, and the Plantronics Wireless Headset base unit. See the detailed instructions below.

  1. Connect the Plantronics wireless headset base unit to the RJ-9 headset port on the IP phone, using the telephone interface cable provided by Plantronics.

    Plantronics Telephone Interface Cable
    Telephone Interface Cable Port on W7XX Headset Base
    Headset Port on Sangoma s700 Phone

  2. Connect the included RJ-12 cord between the EHS30 Adapter RJ12 Port (Port 1) and the EXT/EHS Port of the Sangoma phone.

    RJ12 Port on EHS30
    EXT/EHS Port on Sangoma s700 Phone

  3. Connect the included 3.5mm DC Power Port (Port 3) of the EHS30 Adapter to the handset lifter/EHS cable port on the Plantronics wireless headset base unit.

    DC Power Port on EHS30 Adapter
    Handset Lifter/EHS Cable Port on W7XX Headset Base

  4. Connect the headset base station's power cable between the DC port on the base station and a power outlet.

    DC Power Port on W7XX Headset Base

     

Return to Documentation Home | Sangoma Support