IMG 1010 - Facility Wizard ClientView Pane

 

Description:

Use the Facility Wizard to configure a range of TDM spans.

Accessing this Pane:

Dialogic IMG EMS -> Logical IMG -> Physical IMG -> Facility -> Bearer Spans or Signaling Spans -> Facility Wizard

Maximum Objects:

Only one Facility Wizard can be executed at any one time.

Related Topics:

IMG 1010 - Configuring T1 or E1 Bearer Profile - 10.5.x

IMG 1010 - Configuring T1 or E1 Bearer Spans - 10.5.x

IMG 1010 - Configuring T1 or E1 Signaling Spans - 10.5.x

ClientView Pane: 10.5.x:

Field Descriptions:

Profile:

Select from a drop down menu a list of all the span profiles that have been configured under the Profile object in ClientView.

Start Interface ID:

Select from drop down menu which Interface Offset/Span to start with.

Span Count:

Select from drop down menu the number of spans you would like to configure the Profile on.

 

For Example: (Refer to Screen Capture above) If your starting interface is 0 as shown in screen capture above and your Span Count is set to 10, then Spans 0-9 will get profile T1_Profile1 configured on them.  

 

Return to Documentation Home I Return to Sangoma Support