IMG 1010 - GCL Service

Description:

The Channel Group Service object is created under a SIP Channel Group. By configuring this service, the Channel Group being configured will have a GCL service enabled on it. The Channel Group Service object is created only after the GCL Services Pane and the Network Element Pane are configured. Within the Channel Group Service object, a drop down menu with all services configured under the GCL Services object are available. By inputting a Channel Group Service object, this will inform the IMG which stack to map the Incoming or Outgoing SIP message to. For example if the  SIP-TCAP service is MWI, the service MWI will be the service that Channel Group will use. The Channel Group Service points to the Node/Stack that has the MWI service configured on it.

Accessing this Pane

Dialogic IMG EMS -> Routing Configuration -> Channel Groups -> Channel Group -> New Service

Open

Maximum Objects

1 Service object per SIP Channel Group.

ClientView Pane

Open

Field Descriptions

GCL Service

The GCL Service field will have a drop down menu displaying all the services configured under the GCL Services object in ClientView. Select which service along with the Node ID and Stack ID will be used in the SIP Channel Group.

Called Party Address Indicator (TCAP-ANSI)

The Called Party Address Indicator (TCAP-ANSI) field will have a drop down menu displaying the routing options. IMG supports the ability for CNAM Query to use Translation Type and Global Title information.

• Route on SSN (default behavior) - When this mode is configured, the TCAM_CNAM interface will use a query type containing a Subsystem Number in the Called Party Address Indicator parameter.

• Route on GT (called party ID uses Global Title Address Indicator) - When this mode is configured, the TCAM_CNAM interface will use a query type which containing a Global Title in the Called Party Address Indicator parameter.