IMG 1010 - ISDN Circuits

Description:

Use this pane to assign B-Channels in a Channel Group to a previously configured D-Channel.

Accessing this Pane:

Dialogic IMG EMS-> Routing Configuration -> Channel Group -> ISDN Group -> ISDN Circuits

Maximum Objects:

480 B-Channels per ISDN Group

Related Topics:

IMG 1010 - Configuring ISDN Routing 

ClientView Pane:

Field Descriptions:

IMG Interface:

Select from drop down menu whether the b-channels will be configured on a Bearer Span or a Signaling Span. The Default selection is Bearer Span

Start Interface Offset:

Select from a drop down menu the Starting Interface Offset/Span. The B-Channel can be configured on either the same span that the D-Channel got configured on or a completely different span.

Start Channel:

Select from a drop down menu the first channel that will get configured as a B-Channel.

End Interface Offset:

Select from drop down menu the last Interface Offset/Span that the B-Channels will get configured on.

End Channel:

Select from a drop down menu the last channel that will get configured as a B-Channel

Start Facility Number:

The Facility number of the first Span in the group. Note that Facility 0 is always assigned to the Span that contains the Primary D channel and Facility 1 is always assigned to the Span that contains the Secondary D channel, if one exists, irrespective of the Start Facility Number selected here.

Monitoring Fields:

Trunk Type:

Informational Field - The trunk type of this Circuit Group. T1 or E1 will be displayed.

B Channel Count:

Informational Field - The number of B Channels in this circuit group.

Channel Count:

Informational Field – This is the total number of channels, including D-Channels, configured in this circuit group.

 

Return to Documentation Home I Return to Sangoma Support