IMG 1010 - SIP Proxy

Description:

Use this pane to configure various settings for connection to a SIP Proxy.

Accessing this Pane

Dialogic IMG EMS -> Profiles -> SIP Profile -> SIP Proxy

Maximum Objects:

1 per SIP Profile (SGP)

Related Topics

IMG 1010 - SIP Proxy Handling

Preceding Pane

IMG 1010 - SIP Profile - 10.5.3 

ClientView Pane:

Field Descriptions:

Outbound Proxy:

Enable- Use this Proxy for routing.

Disable (default)- Do Not use a Proxy. Use internal routing tables instead.

Send Re-Invite to Proxy:

Enable- All INVITE messages, including those generated as a result of Transfer or Redirect are sent to Proxy.

Disable (default)- INVITE messages that are generated as a result of Transfer or Redirect, are sent directly to the URL referenced in the refer-to header in the REFER message or contact header in 30x response.

Send Outbound Register:

Enable- IMG registers to Proxy/Registrar at power up.

Disable (default)- IMG does not register to Proxy/Registrar.

Proxy Transport:

UDP (default)- Use UDP as a means of transporting messaging

TCP- Use TCP as a means of transporting messaging

Proxy Address Type:

Host Name- Use Hostname when communicating with Proxy Server. If specified the name is used in the Request-URI and other SIP messages.

IP Address- Use IP address when communicating with Proxy

Proxy Name:

If Proxy Address Type  field above is set to Hostname, enter a name for that Proxy.

Proxy IP Address:

If Proxy Address Type  field above is set to IP Address, enter an IP address for that Proxy.

Proxy Port:

Default port is Port 5060. The port can be changed by clicking in the field and entering the new port number

Return to Documentation Home I Return to Sangoma Support